Hi
Try again with a smaller EPS_DEFAULT value, e.g. 1.0E-12 instead of 1.0E-7, a larger CUTOFF value, at least 300 (Ry) instead of 200, and a larger REL_CUTOFF value, at least 40 instead of 30, to get numerically more meaningful results.
Matthias
--
You received this message because you are subscribed to the Google Groups "cp2k" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
cp2k+uns...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/cp2k/748a2567-9315-4c6d-8b53-4cb2541c2614%40googlegroups.com.
Hi
Try again with a smaller EPS_DEFAULT value, e.g. 1.0E-12 instead of 1.0E-7, a larger CUTOFF value, at least 300 (Ry) instead of 200, and a larger REL_CUTOFF value, at least 40 instead of 30, to get numerically more meaningful results.
Matthias
Von: cp...@googlegroups.com <cp...@googlegroups.com> Im Auftrag von Timo van Opstal
Gesendet: Samstag, 28. September 2019 23:38
An: cp2k <cp...@googlegroups.com>
Betreff: [CP2K:12286] Reproducing results cross-platform
I've downloaded precompiled binaries for Windows and Mac OS and run a simple geometry optimisation on a water molecule. However, the output differs significantlly, already the SCF iterations seem to behave better with the Windows binaries. I increased the verbose to inspect differences but can't find an apparent reason for the discrepancy between the two runs. Help is much appreciated!
CP2K version: 6.1, SVN revision 18464
--
You received this message because you are subscribed to the Google Groups "cp2k" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cp...@googlegroups.com.