--
You received this message because you are subscribed to the Google Groups "Connected Community HackerSpace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to connected-community-hackerspace+unsubscribe@googlegroups.com.
To post to this group, send email to connected-community-hacke...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/connected-community-hackerspace/f87975a2-f57c-4397-97fd-e3364e52e978%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Perhaps add a 1x1 pin header and make it a SMD pad ?
On 2 November 2016 at 10:26, tubular <lac...@tubularcontrols.com> wrote:
Hi allI don't normally use eagle but was helping Paul with it as best I could last night.I think we sorted the gerber generation, but the question is how to get a single 'test point' pad into the schematic and pcb design? At the moment it's in as a banana plug, which works but is clearly much bigger than it needs to bethanksLachlan
--
You received this message because you are subscribed to the Google Groups "Connected Community HackerSpace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to connected-community-hackerspace+unsu...@googlegroups.com.
To post to this group, send email to connected-community-hackerspace...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/connected-community-hackerspace/f87975a2-f57c-4397-97fd-e3364e52e978%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Connected Community HackerSpace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to connected-community-hackerspace+unsubscribe@googlegroups.com.
To post to this group, send email to connected-community-hacke...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/connected-community-hackerspace/CAOX4-H5A%2BU%2BmH%2BDdt92o1BLYpps99DW_E_qxXxq8MSr2LgJeMg%40mail.gmail.com.
To unsubscribe from this group and stop receiving emails from it, send an email to connected-community-h...@googlegroups.com.
To post to this group, send email to connected-commu...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/connected-community-hackerspace/CAD3%3D5ZNS1xaR-w%2BcsNdOvh7DQiYZr0ZrwhyAJ0Kzt49_Wjq%2B0w%40mail.gmail.com.