How to "Reset" the players

[James K]

I will be cutting over to a new VLAN for our concerto digital signage system, which I believe will require I repair the players to our concerto server.  Will I need to reset the players and relink them to the server?  This new VLAN is an different IP scheme.  

And if I do reset them, how do I go about doing that?  I have SSH access to all of them right now.

Thanks!

[Brian Michalski]

Players are typically pretty dumb devices - just a web browser pointed at a URL.

If you're changing VLANs, you probably just need to make sure the player devices can still connect to the server.  Maybe that'd require a simple reboot if anything is changing in DHCP/DNS-land... but otherwise I can't think of anything Concerto-specific.

~Brian M

--
You received this message because you are subscribed to the Google Groups "Concerto Digital Signage" group.
To unsubscribe from this group and stop receiving emails from it, send an email to concerto-digital-s...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/concerto-digital-signage/1fe6011f-b1bd-45f9-b6c0-f050f39f65efn%40googlegroups.com.

[James K]

Looks like the player is still looking for the old IP address of the server.  our players are currently on USB sticks that boot on an intel NUC. Is there a config file i can change somewhere on the player to update the server IP or reset the pairing process?

[James K]

I figured it out.  For those in a similar situation, there is a file on the USB containing the player image.  It is under concerto/config/concerto_url.  Update the url there and plug in the USB and boot.

On Friday, May 30, 2025 at 11:31:00 PM UTC-4 bmich...@gmail.com wrote: