freq +d2 question

[Sarah Kresh]

Hi Leonid and Brian!

I would like to run freq for the Child Directed Speech in many files at once. I know  I can do this for all the different speaker roles:
freq +d2 +t@ID="*target_child*" +u  +o3 @

but if I could do this, I wouldn't have to extract all the different speaker roles from the .cha files:
freq +d2 -t@ID="*target_child*" +u  +o3 @
This command gives this error:
CAN'T FIND ANY DATA TIERS IN ANY OF INPUT FILES
PLEASE PROVIDE A SPECIFIC SPEAKER WITH +t OPTION

As it is, I figured out the speaker tier codes for the target children from the output of the first freq command above and then did this:
freq +d2 -t*CHI -t*PAU +u  +o3 @

And that's a workable solution, but I was just wondering why the t switch doesn't work both ways in this command and if that is generally true for @tier info.


thanks!
Sarah

[Leonid Spektor]

Sarah,

The -t option with @ID was never implemented, because people always seemed to want to including target_child in the analyses. I have changed CLAN to allow excluding -t@ID speakers and I will install new CLAN on chilled web site tomorrow.

Leonid.

--
You received this message because you are subscribed to the Google Groups "chibolts" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chibolts+u...@googlegroups.com.
To post to this group, send email to chib...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/chibolts/26f52413-f417-491f-8f67-016667309ddf%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Sarah Kresh]

Thanks, Leonid!