CHECK output window does not report "Success!" but transcript window does

[Katie Winters]

After updating our lab's CLAN application to the newest version, CLAN no longer reads "Success! No errors found" in the output window after running CHECK. Instead, CLAN reads the following in the output window:

> check @
Language codes file being used: "C:\talkbank\clan\lib\fixes\ISO-639.cut"
Dep-file being used: "C:\talkbank\clan\lib\depfile.cut"
check @
Thu Oct 05 10:11:48 2017
check (14-Sep-2017) is conducting analyses on:
  ALL speaker tiers
    and those speakers' ALL dependent tiers
  and ALL header tiers
****************************************

> 

If I run CHECK using the "esc+L" shortcut within the transcript window for the same file, the "Success! No errors found" message appears at the bottom of the transcript window (see attached). 

Is there something I'm missing when running CHECK through the commands window or something I can do to yield the "Success!" message in the commands window? Thank you!

[Leonid Spektor]

No, Commands line CHECK now longer outputs "Success" message. Brian MacWhinney asked me to disable that to cutdown on non-error related messages.

Leonid.

--
You received this message because you are subscribed to the Google Groups "chibolts" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chibolts+u...@googlegroups.com.
To post to this group, send email to chib...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/chibolts/17cda28e-3fe6-40bb-a70f-e71ff0cd4e88%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Katie Winters]

Got it. Thank you!