Problem with NEC Projectors

[Ciarán Ó Muirgheasa]

Hi All,

Looking for some technical help for my wife's school.  They have 2 NEC 305P projectors which have red/orange light showing a lamp problem.  Both lamps have been replaced, but lamp warning light is still constant.  All filters were cleaned.  As the projector can not be powered on, the lamp and filter hours cannot be reset.

Is there another fault that could be causing this problem?  Anyone come across this issue and know of a solution?

Many thanks as always

Ciarán

[Joe Halpin]

Ciarán

The projector is reset from the remote. It is quite simple and I have had to do it in a number of schools. Unfortunately it is so long since I did it I cannot remember sequence.

 

The person you got the lamps from should have done it for you or should be able to assist. It only takes less than a minute.

 

If they cannot help then phone Equinox in Dublin or NEC in the UK and they will talk you through it.

 

 

Kindest regards

 

 

Joe Halpin

 

Comdex Technology

Oldtown

Johnstown

Navan

Co. Meath

C15CY68

 

Phone 046 9077086  

Email  jha...@comdex.ie

 

Irelands cheapest source for Interactive Panels and Projectors

 

Thank you for supporting local Irish jobs

“My working day may not match yours so please do feel you have to respond outside of your normal working hours”

--
--
You received this message because you are subscribed to the Google
Groups "CESI-list" group.
To post to this group, send email to cesi...@googlegroups.com
To unsubscribe from this group, send email to cesi-list+...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/cesi-list?hl=en-GB where all messages are archived and are publically available to non members of the list. Messages may also show up in search engines etc.
Visit the web site www.cesi.ie
Attempts to use the list for commercial purposes may result removal from the list.
---
You received this message because you are subscribed to the Google Groups "CESI-list" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cesi-list+...@googlegroups.com.
To view this discussion, visit https://groups.google.com/d/msgid/cesi-list/CAPaMcyNC1MNRiWt0Knz4quo6s5iJ%3D5Yw2CDR5dRkaUV8-i31Uw%40mail.gmail.com.

[Conor Power]

Some NEC models can be reset by holding the power button down before plugging in.

To view this discussion, visit https://groups.google.com/d/msgid/cesi-list/001101dbc41f%2417c41bc0%24474c5340%24%40comdex.ie.

[Ciarán Ó Muirgheasa]

Thanks, for the help.  Hopefully will get it sorted!

/Ciarán

Ar Máirt 13 Beal 2025 ag 17:02, scríobh Conor Power <cpo...@cesi.ie>:

To view this discussion, visit https://groups.google.com/d/msgid/cesi-list/CAHf04m0ia7bqUTvoAmxJCNQu1ZLd1PhYqQwQwLC0tWiF4HT2EQ%40mail.gmail.com.

[Val Gavin]

Hi Ciarán

Start the projector and let it enter standby mode.

Then on the remote controller

Press and hold the left arrow and right arrow buttons

While those two remote buttons are held down, press and hold the power button on the projector until the lamp indicator light  flashes twice, that indicates the lamp hours are reset.

If that fails 

Press the Menu button on the projector, scroll until you see the Default Option and select it, then from the sub-menu select clear lamp settings.

Val

To view this discussion, visit https://groups.google.com/d/msgid/cesi-list/CAPaMcyP0JF5gpUUpoXHybehO_W-hBQ%3D8bdAxLRYD0x_V0y2vAA%40mail.gmail.com.

[Ciarán Ó Muirgheasa]

Great, thanks Val

/Ciarán

Ar Máirt 13 Beal 2025 ag 18:09, scríobh Val Gavin <v...@valgavin.biz>:

To view this discussion, visit https://groups.google.com/d/msgid/cesi-list/f6b68f26-bea1-4a29-80ed-ffa200759f33%40email.android.com.