Master builds and runs but won't launch

[Nathan Henrie]

I started getting an issue last night — master builds and runs but won’t open, with the below dialog:

I’m set to use built-in bezel by default. I’ve re-pulled from master, nuked all local changes, cleared the Xcode build cache, zipped up and blown away ~/Library/Application Support/QS, removed ~/Library/Caches, still can’t get a fresh build from master to launch.

Anyone else seeing this? Figured I'd ask before starting an issue as it's likely to only affect devs, and since neither of you had mentioned it I thought it might be a "me" issue somewhere. If affecting anyone else I'll run a bisect and see if I can chase it down.

Nate

[Patrick Robertson]

This vaguely rings a bell. Restart Xcode, reboot, rm /tmp/QS 

This post says the same thing: https://groups.google.com/g/quicksilver---development/c/_2llLcswbn4/m/Vs37GWtB90sJ

This sort of mentions it: did you build any plugins? 

https://groups.google.com/g/blacktree-quicksilver/c/qZWtfDpRmtw/m/nGzFId96uHgJ

Of course, check the Xcode console as well when you run from within Xcode

P.S. We have the Dev groups for dev talk: https://groups.google.com/g/quicksilver---development

<Screen Shot 2022-02-11 at 20.26.51.png>

Nate

--
You received this message because you are subscribed to the Google Groups "Quicksilver" group.
To unsubscribe from this group and stop receiving emails from it, send an email to blacktree-quicks...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/blacktree-quicksilver/CAOMt5FAicLrMzNdsPSbBneKz8YvTWFbaLvWf%2B3kV6xzEnG5n8g%40mail.gmail.com.

[Tim Lawson]

Patrick Robertson lives!!!

On 12 Feb 2022, at 15:30, Patrick Robertson <robertso...@gmail.com> wrote:



To view this discussion on the web visit https://groups.google.com/d/msgid/blacktree-quicksilver/3C749485-8D35-4211-A291-0024A0C47346%40gmail.com.