Hull measures

[Rauno Edur]

Hi,

Can anyone tell me the hight of the hull?

plan to tansport on the land, but this is my first one and i do not know measures.

thanks for advance!
Rauno

[Rauno Edur]

The model is 1995 Oceanis 351

[Scott Sexton]

Can you measure from the waterline to the top of the pulpit, then add that number to your draft?  That should give you the number you need.

 

 

***********************************

Scott H. Sexton

Sexton Consulting            www.sexton.com

Be a part of the solution    -    Volunteer

*             *             *             *             *            *
...Just be nice.       -    Danny Roy Young

 

From: benetea...@googlegroups.com <benetea...@googlegroups.com> On Behalf Of Rauno Edur
Sent: Tuesday, October 25, 2022 01:49
To: Beneteau Owners <benetea...@googlegroups.com>
Subject: {Beneteau Owners} Re: Hull measures

 

The model is 1995 Oceanis 351

Rauno Edur kirjutas Teisipäev, 25. oktoober 2022 kl 09:48:27 UTC+3:

Hi,

Can anyone tell me the hight of the hull?

plan to tansport on the land, but this is my first one and i do not know measures.

thanks for advance!
Rauno

--
Largest Beneteau group, over **1500** members and growing.
 
To post to this group, send email to Benetea...@googlegroups.com
To unsubscribe from this group, send email to Beneteau-Owne...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/Beneteau-Owners
Contact beno...@gmail.com if you have a list management question
---
You received this message because you are subscribed to the Google Groups "Beneteau Owners" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beneteau-owne...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beneteau-owners/8a303921-d803-4d9f-8548-6cc95407bffen%40googlegroups.com.

[Rauno Edur]

Yes - I measured it.

But i want to be sure or confirme my results.

Beacause trailer+boat will be very close to the allowed hight of our roads - i do not want cut the electric cables

To view this discussion on the web visit https://groups.google.com/d/msgid/beneteau-owners/BL0PR11MB317067DC0FB21476F9A32240BF319%40BL0PR11MB3170.namprd11.prod.outlook.com.

[Leslie Gevirtz]

I don’t have an Oceanis 351, but I would hope the information you need to confirm can be found in one of the links below. 

And don’t forget to unstep the mast and take into account the additional length and weight. 

https://www.manualslib.com/manual/1633532/Beneteau-Oceanis-351.html

https://sailboatdata.com

Cheers. 

To view this discussion on the web visit https://groups.google.com/d/msgid/beneteau-owners/CAGspFUMS2UcMM3-3yoNkabo%3DekHiXQ_wsy1dY_wJEYjkMcy-hg%40mail.gmail.com.

[Rauno Edur]

Hi

Actually these manuals does not help.

Can't find with Google any measurements about the hull.

Maybe someone can measure on land.

Cheers

To view this discussion on the web visit https://groups.google.com/d/msgid/beneteau-owners/CAMt5AdoFfftfg2rn9n%3DvZdULee75T%3DbyfTrJkDq6_-rfte4kcQ%40mail.gmail.com.

[Paul Schwab]

Rauno,

The measurement you are looking for online or in print does not exist.  It serves no purpose in the world of sailing and would not be recorded.  

You assume the bow pulpit is the highest point on the hull after the mast is dropped.  You also assume the boat will be loaded on a trailer with the waterline perfectly level. Both of these assumptions will not give you the number you are looking for.  You have no choice but to load the boat on the trailer and then measure your total height.

Good luck . . . 

To view this discussion on the web visit https://groups.google.com/d/msgid/beneteau-owners/CAGspFUMAaEF3-%2BEdrTuqhVhAGi7ziYOSnf_c3XdOcxekoR8ROg%40mail.gmail.com.

[chris evans]

I can my boat just came out along with many others . You will get a faster answer on Beneteau 351/352 facebook site 400 members

[LA S]

Ok, I have to ask:

Draft - bottom of leel to waterline.

Plus

Freeboard

Plus

Standard lifeline height

Plus

A % for fudge

Just asking?

To view this discussion on the web visit https://groups.google.com/d/msgid/beneteau-owners/CAAdnuN1HxTaDP7-yqtcYdwcf2xVLxYExcskZWJ%2BE1Nw8ycaapA%40mail.gmail.com.

[bruc...@comcast.net]

Thinking about transport of my 393 to FL from NJ. Any one have an estimated cost?

 

Bruce

 

Bruce Schwartz

Bruc...@comcast.net

202-468-6747

To view this discussion on the web visit https://groups.google.com/d/msgid/beneteau-owners/CAOp3vcWRCDVUQiRvpyL%3DMjesePf%3DnTa6gwjdRmH77zs8kpBNxA%40mail.gmail.com.

[TMACMI]

Have you reached out to Beneteau? I've found their customer service to be helpful. You will need to provide them with the HIN.

[JoeT]

Just transported my 343 but did not measure the height on the trailer, but it was just under the limit. I would expect the 351 pulpit height might be a bit taller, but not much, but it has a shallower draft at ~5' vs my 6'1". Don't forget to consider the beam as you might be a 'wide load'. 

I also race on a J105 which gets trailered around the country some. It does require oversize permits and defined routes, but have not incurred overhead wire issues. That's the reason for defined routes.

JoeT

'06 B343 
Regina del Seni

[Rauno Edur]

Thanks for all who thought along.

For the future may-be useful information fir someone...

With the 900mm flatbed the height came 4550mm.

BR

Rauno

You received this message because you are subscribed to a topic in the Google Groups "Beneteau Owners" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/beneteau-owners/0-EBnzNjC-I/unsubscribe.
To unsubscribe from this group and all its topics, send an email to beneteau-owne...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beneteau-owners/788fe731-4a04-44fc-bda0-871d36a01cdbn%40googlegroups.com.