Genoa halyard turning block top of mast

[Roger Goodfellow]

I have a Beneteau first 310 1991. 

Subject block is jammed with halyard. 

I had someone up the mast and they were unable to free halyard. 

Any suggestions please. 

[William Pribe]

Good Morning, 

I had a First 310 and that happened to me also. The shive is plastic and the shive split, jamming the halyard. I had to take down the mast to get the halyard free and replaced the shive. I ordered aluminum shives and replaced all of them with the aluminum ones. 

Bill Pribe 

Wing Jammer 36.7

--
Largest Beneteau group, over **1500** members and growing.
 
To post to this group, send email to Benetea...@googlegroups.com
To unsubscribe from this group, send email to Beneteau-Owne...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/Beneteau-Owners
Contact beno...@gmail.com if you have a list management question
---
You received this message because you are subscribed to the Google Groups "Beneteau Owners" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beneteau-owne...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/beneteau-owners/06489d80-e43e-4029-b9ed-4612700d02b3n%40googlegroups.com.

--

Bill Pribe

2026 AYC Sail Fleet Captain

Past Commodore NCYC 2010

419-349-7353 Cell
419-866-9050 Work

[Roger Goodfellow]

Thank you so much. 

Sent from my iPad

On May 26, 2026, at 10:34 AM, William Pribe <wpr...@gmail.com> wrote:



To view this discussion visit https://groups.google.com/d/msgid/beneteau-owners/CALzdANY7WkN%3DtVtp5VTNm2Tdvw%2B%2Br4DevtDBkjZ88xT%3DHFe1zw%40mail.gmail.com.

[S/V Slainte; First 310]

Yes, sounds like the sheave is broken or flat spotted. think the simplest solution in the long run is to drop the stick. Good news is it will give you the opportunity to inspect everything and replace the worn out stuff as needed. I replaced all the sheaves in mine, rewired, etc. the first year I had my 310. Good luck with it.

[Hay Tanning]

Hello, i recently changed the oil and oil Filter on my 2006 Beneteau 423 and it was fairly  simple.  Is changing the Fuel Filter basic as well. I would sinply unscrew the old one and replacing it with a new one? Or do I need to shut off the Fuel and bleed the air out later?

The is for the Fuel filter nearby the oil filter. Not the one with the water separator.

Any advice is appreciated.  I should have watched the mechanic when he changed it a year ago and I can't find any good YouTube videos on it.

--
Largest Beneteau group, over **1500** members and growing.
 
To post to this group, send email to Benetea...@googlegroups.com
To unsubscribe from this group, send email to Beneteau-Owne...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/Beneteau-Owners
Contact beno...@gmail.com if you have a list management question
---
You received this message because you are subscribed to the Google Groups "Beneteau Owners" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beneteau-owne...@googlegroups.com.

To view this discussion visit https://groups.google.com/d/msgid/beneteau-owners/71757fee-77eb-4be5-96ad-b4aa08cb03e6n%40googlegroups.com.