Connect a LCD to the Beagle -Xm rev B

[udayanga]

Hi,

I'm using the Beagle -Xm rev B board with my university project. I
want to connect a LCD to the board. Can i connect a LCD to this
revision?. Please let me know.

Thank You.

[udayanga]

[Hunyue Yau]

Yes, you can connect an LCD to the xM. Classic Beagle LCD
interfaces mostly just work with the xM. Some designs will need
mods in how it is powered. With a little minor hardware
reconfiguration, I was able to get my LCD interface working on the
xM. The mechanical parts of it is the biggest problem as the
default connectors on the xM results in a gigantic stack. Sorry,
no pictures yet.

--
Hunyue Yau
http://www.hy-research.com/

[Jim Norton]

Hello Hunyue, I emailed you multiple times a few months ago about when you might have a working LCD solution for the BB -xm. Seems like you have one working now? Is this something that can be purchased? Does it support more than one LCD display? Thanks, Jim Norton --- On Wed, 5/11/11, Hunyue Yau <ybe...@rehut.com> wrote:

-- You received this message because you are subscribed to the Google Groups "Beagle Board" group. To post to this group, send email to beagl...@googlegroups.com. To unsubscribe from this group, send email to beagleboard+unsub...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/beagleboard?hl=en.

[Hunyue Yau]

On Wed May 11 2011 12:05:07 Jim Norton wrote:
> Hello Hunyue,
>
> I emailed you multiple times a few months ago about when you
> might have a working LCD solution for the BB -xm. Seems like
> you have one working now? Is this something that can be
> purchased? Does it support more than one LCD display?

Hi Jim,

Yes, the LCD itself is working. The purchaseable part depends on
interest given how thick of a stack the xM forces things to be.
It is available as a special item in the same manner that it is
available for the other A9 animal board. Right now, it supports
3-4 different LCDs.

[Richard Myhre Nordkvelde]

http://cgi.ebay.com/7-Touchscreen-LCD-Flyingtouch-1-EPad-MID-Tablet-/370494694505?pt=UK_Computing_LaptopAccess_RL&hash=item5643346469#ht_2723wt_905
Anyone checked this out? Or had any past experiences with it?
I'm in the same boat as you guys, and I have bought the touch screen
above. Any thoughts about it? Any clue if it's gonna work on the BB-
xM? Sorry for sounding less-smart, I'm just new to the whole BB
schematics.
Richard

On May 12, 1:42 am, Hunyue Yau <ybea...@rehut.com> wrote:
> On Wed May 11 2011 12:05:07 Jim Norton wrote:
>
> > Hello Hunyue,
>
> > I emailed you multiple times a few months ago about when you
> >  might have a working LCD solution for the BB -xm. Seems like
> >  you have one working now? Is this something that can be
> >  purchased? Does it support more than one LCD display?
>
> Hi Jim,
>
> Yes, the LCD itself is working. The purchaseable part depends on
> interest given how thick of a stack the xM forces things to be.
> It is available as a special item in the same manner that it is
> available for the other A9 animal board. Right now, it supports
> 3-4 different LCDs.
>
>
>
>
>
>
>
>
>
>
>
> > Thanks,
> > Jim Norton
>

> > --- On Wed, 5/11/11, Hunyue Yau <ybea...@rehut.com> wrote:

[Vladimir Pantelic]

Richard Myhre Nordkvelde wrote:
> http://cgi.ebay.com/7-Touchscreen-LCD-Flyingtouch-1-EPad-MID-Tablet-/370494694505?pt=UK_Computing_LaptopAccess_RL&hash=item5643346469#ht_2723wt_905

looks like a standard 18/24bit parallel LCD with a separate 4wire
resistive touchscreen. most likely some level shifter are needed
and of course the correct timing.

[myaroni...@gmail.com]

Deandre faison I like the to work and I do have right right right in every game right rand rit right in each rsong is the good Riedel right ryou I r