--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/f4d25ff7-0aa1-4312-9133-bbd680cd6405%40googlegroups.com.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/7306312b-a4d9-d50c-18f0-1c011f67d6ae%40longlandclan.id.au.
I have experienced the random reset issue on 10+ PBs when using VIN_AC, so I moved to power through USB1_VIN too. That fixed the intermittent reset-issue. But periodically I’m now experiencing the issue where the device will not power up after a shutdown, when pulling the PowerButton pin low.
Did anyone find a solution for this?
VOUT and VBAT are both showing 1.09 V in this situation (they are not connected to any circuitry.
Best regards,
Erik
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/f9cc34e1-4b35-4734-a065-022c13bc1a09%40googlegroups.com.