Static IP on BBB and AM3358 Debian 10.3 2020-04-06 4GB SD IoT Image

[nicola...@gmail.com]

Hi all,

I upgraded my BBB with the image in the object. Trying to set up the /etc/network/interfaces file as following:

# The loopback network interface

auto lo

iface lo inet loopback

# The primary network interface

#allow-hotplug eth0

iface eth0 inet static

 address 192.168.1.25

 netmask 255.255.255.0

 gateway 192.168.1.1

the BBB does not set the static ip as expected. Using the previous image release (AM3358 Debian 9.12 2020-04-06 4GB SD ImgTec) the IP setting worked fine.

Please, any advice?

Thank's in advance.

n

[evilwulfie]

connman does all of that
Please search list for the 1000s of emails regarding this issue

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e3368bd3-6607-4518-9b28-031b62cc6d6a%40googlegroups.com.

[Robert Nelson]

Run connmanctl services:

debian@bbb-pwr01-ser09:~$ sudo connmanctl services
*AO Wired ethernet_c8a030abf366_cable

"copy" your version of: ethernet_c8a030abf366_cable

Then run:

sudo connmanctl config <service> --ipv4 manual <ip_addr> <netmask>
<gateway> --nameservers <dns_server>

sudo connmanctl config ethernet_c8a030abf366_cable --ipv4 manual
192.168.1.25 255.255.255.0 192.168.1.1 --nameservers 8.8.8.8

Regards,

--
Robert Nelson
https://rcn-ee.com/

[NicolaF]

Thank you! 

Solved