Skip to first unread message
Sri Ram
May 30, 2017, 4:06:47 PM5/30/17
to BeagleBoard
I want to use Beagle Bone Blue for a Quadrotor Project. This is my first BeagleBone.
It is not being recognized in my system which uses Windows 10. It is not even showing in the device manager. Please help me with this issue.
Thank You.
Robert Nelson
May 30, 2017, 4:09:44 PM5/30/17
to Beagle Board, srih...@gmail.com
https://rcn-ee.net/rootfs/bb.org/testing/2017-05-28/iot/BBBL-blank-debian-8.8-iot-armhf-2017-05-28-4gb.img.xz
use http://etcher.io to write the *.img.xz file to the microSD for flashing
Regards,
--
Robert Nelson
https://rcn-ee.com/
Sri Ram
May 30, 2017, 4:34:16 PM5/30/17
to BeagleBoard, srih...@gmail.com
I flashed the SD Card using Etcher. What is the next step?
Where is USER/BOOT button for BB Blue?
Robert Nelson
May 30, 2017, 4:39:18 PM5/30/17
to Beagle Board, srih...@gmail.com
On Tue, May 30, 2017 at 3:34 PM, Sri Ram <srih...@gmail.com> wrote:
> I flashed the SD Card using Etcher. What is the next step?
> Where is USER/BOOT button for BB Blue?
It's labled "SD" on the Blue board, next to the 3x9 terminal connector.
> I flashed the SD Card using Etcher. What is the next step?
> Where is USER/BOOT button for BB Blue?
Sri Ram
May 31, 2017, 7:17:18 AM5/31/17
to BeagleBoard
Hi I am Newbie working on BeagleBone.
My BeagleBone Blue is not being recognized in my system ( Windows 10). I tried reinstalling the drivers and rebooting my system but it didn't work out.
Is it a software issue? Please help me with this issue.
Robert Nelson
May 31, 2017, 10:01:47 AM5/31/17
to Beagle Board, Sri Ram
it's built-in driver.
You should see a new drive show up in my computer, open the start.htm
Reply all
Reply to author
Forward
0 new messages