Unable to run MJPG-Streamer on BeagleBone Blue using C270

[Daniyal Ansari]

Im trying to use mjpg-streamer on my Beaglebone Blue running Debian 8.7 (bone-debian-8.7-lxqt-4gb-armhf-2017-03-19-4gb.img.xz).

I am also using 2 C270 logitech webcams but am only trying to stream one at a time.

This is the tutorial I have been trying to follow to install MJPG-Streamer as it uses the BB-Black which is the closest tutorial I can find to the BB-Blue.

Here are the commands supplied by the tutorial.

sudo apt-get install g++ curl pkg-config libv4l-dev libjpeg-dev build-essential libssl-dev vim cmake

sudo apt-get install imagemagick

wget https://github.com/shrkey/mjpg-streamer/raw/master/mjpg-streamer.tar.gz

tar -xvf ./mjpg-streamer.tar.gz

cd mjpg-streamer

make

sudo make install

./mjpg_streamer -i "./input_uvc.so" -o "./output_http.so -w ./www"

This is my result fom running ./mjpg_streamer -i "./input_uvc.so" -o "./output_http.so -w ./www":

debian@beaglebone:~/mjpg-streamer$ ./mjpg_streamer -i "./input_uvc.so" -o "./output_http.so -w ./www -p 8090"

MJPG Streamer Version: svn rev: 

 i: Using V4L2 device.: /dev/video0

 i: Desired Resolution: 640 x 480

 i: Frames Per Second.: 5

 i: Format............: MJPEG

Adding control for Pan (relative)

UVCIOC_CTRL_ADD - Error: Inappropriate ioctl for device

Adding control for Tilt (relative)

UVCIOC_CTRL_ADD - Error: Inappropriate ioctl for device

Adding control for Pan Reset

UVCIOC_CTRL_ADD - Error: Inappropriate ioctl for device

Adding control for Tilt Reset

UVCIOC_CTRL_ADD - Error: Inappropriate ioctl for device

Adding control for Pan/tilt Reset

UVCIOC_CTRL_ADD - Error: Inappropriate ioctl for device

Adding control for Focus (absolute)

UVCIOC_CTRL_ADD - Error: Inappropriate ioctl for device

mapping control for Pan (relative)

UVCIOC_CTRL_MAP - Error: Inappropriate ioctl for device

mapping control for Tilt (relative)

UVCIOC_CTRL_MAP - Error: Inappropriate ioctl for device

mapping control for Pan Reset

UVCIOC_CTRL_MAP - Error: Inappropriate ioctl for device

mapping control for Tilt Reset

UVCIOC_CTRL_MAP - Error: Inappropriate ioctl for device

mapping control for Pan/tilt Reset

UVCIOC_CTRL_MAP - Error: Inappropriate ioctl for device

mapping control for Focus (absolute)

UVCIOC_CTRL_MAP - Error: Inappropriate ioctl for device

mapping control for LED1 Mode

UVCIOC_CTRL_MAP - Error: Inappropriate ioctl for device

mapping control for LED1 Frequency

UVCIOC_CTRL_MAP - Error: Inappropriate ioctl for device

mapping control for Disable video processing

UVCIOC_CTRL_MAP - Error: Inappropriate ioctl for device

mapping control for Raw bits per pixel

UVCIOC_CTRL_MAP - Error: Inappropriate ioctl for device

 o: www-folder-path...: ./www/

 o: HTTP TCP port.....: 8090

 o: username:password.: disabled

 o: commands..........: enabled

The only modification I made was to the port that the server runs on where I changed it from 8080 to 8090.

Thank you!