configure USB using Scilab

13 views
Skip to first unread message

NOUHA el mehri

unread,
Oct 13, 2016, 7:35:48 AM10/13/16
to BeagleBoard
hi, i am working in a  project i need to configure the usb0 and replace the port ttycom0 by usb0 using scilab i used a comand genlib but it didnt work if anybody can help me by suggesting another comand or idea i will be grateful thank you

William Hermans

unread,
Oct 13, 2016, 4:00:39 PM10/13/16
to beagl...@googlegroups.com, elmehr...@gmail.com
More information is needed.

On Wed, Oct 12, 2016 at 1:28 PM, NOUHA el mehri <elmehr...@gmail.com> wrote:
hi, i am working in a  project i need to configure the usb0 and replace the port ttycom0 by usb0 using scilab i used a comand genlib but it didnt work if anybody can help me by suggesting another comand or idea i will be grateful thank you

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/ab8f5912-69df-4161-a94b-2a63c01c18e1%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply all
Reply to author
Forward
0 new messages