Single pin connectors for individual wires BBB expansion header
29 views
Skip to first unread message
dwv...@yahoo.com
Oct 17, 2018, 1:58:39 PM10/17/18
to BeagleBoard
I want to connect several individual wires to the BBB p9 header. I would rather not use an entire 46pin header to do this. Rather, I was thinking of finding some kind of single pin solder socket to solder on to the end of each wire and then push the pin into the appropriate header receiver pin number. Does anyone know of such a solder socket with the correct gold plated square pin to use? I tried to search digikey, etc. but don't even know what the correct name for such a device would be.
Thanks,
David
Robert Nelson
Oct 17, 2018, 2:06:20 PM10/17/18
to Beagle Board
On Wed, Oct 17, 2018 at 12:58 PM dwviel via BeagleBoard
<beagl...@googlegroups.com> wrote:
>
> I want to connect several individual wires to the BBB p9 header. I would rather not use an entire 46pin header to do this. Rather, I was thinking of finding some kind of single pin solder socket to solder on to the end of each wire and then push the pin into the appropriate header receiver pin number. Does anyone know of such a solder socket with the correct gold plated square pin to use? I tried to search digikey, etc. but don't even know what the correct name for such a device would be.
Like these:
<beagl...@googlegroups.com> wrote:
>
> I want to connect several individual wires to the BBB p9 header. I would rather not use an entire 46pin header to do this. Rather, I was thinking of finding some kind of single pin solder socket to solder on to the end of each wire and then push the pin into the appropriate header receiver pin number. Does anyone know of such a solder socket with the correct gold plated square pin to use? I tried to search digikey, etc. but don't even know what the correct name for such a device would be.
https://www.digikey.com/product-detail/en/adafruit-industries-llc/758/1528-1154-ND/5353614
made by Adafruit..
Regards,
--
Robert Nelson
https://rcn-ee.com/
dwv...@yahoo.com
Oct 17, 2018, 3:01:10 PM10/17/18
to BeagleBoard
I'm thinking something like these:
but a single pin. And, perhaps a solder cup connection for the wire.
dwv...@yahoo.com
Oct 17, 2018, 3:01:10 PM10/17/18
to BeagleBoard
Almost. But, I was hoping that the end of the wire would have the square gold plated pin attached.
Robert Nelson
Oct 17, 2018, 3:05:36 PM10/17/18
to Beagle Board
On Wed, Oct 17, 2018 at 2:01 PM dwviel via BeagleBoard
<beagl...@googlegroups.com> wrote:
>
> Almost. But, I was hoping that the end of the wire would have the square gold plated pin attached.
Like this variant:
<beagl...@googlegroups.com> wrote:
>
> Almost. But, I was hoping that the end of the wire would have the square gold plated pin attached.
https://www.digikey.com/product-detail/en/adafruit-industries-llc/826/1528-1162-ND/5353622
Mike Jaeger
Oct 17, 2018, 3:53:36 PM10/17/18
to beagl...@googlegroups.com
Mill-Max has a line of solder cup pins for discrete wire termination. The 8301 series has an 0.025 inch square pin.
Mike Jaeger
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYgdGYj6DEOkz5%3DGkvQUD-D2UT150WjiqBwB4SVBgpE9mg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
dwv...@yahoo.com
Oct 17, 2018, 7:58:05 PM10/17/18
to BeagleBoard
Or possibly:
What diameter should the post be to fit in the connector?
dwv...@yahoo.com
Oct 17, 2018, 7:58:08 PM10/17/18
to BeagleBoard
I think I can build what I want by using these:
Just solder to the end and maybe a shrink tube covering to provide insulation.
Reply all
Reply to author
Forward
0 new messages