ADC register base address of the BBAI

[Stephan Böck]

Hallo,

I was looking for the base address of the ADC register (on the BBB it is 0x44E0D00). So I searched the AM572x reference manual, but couldn't find anything. 

In the migration guide from AM335x to AM57x it says, that there is no ADC present (http://www.ti.com/lit/an/sprac91/sprac91.pdf page 3). 

I am a bit confused right now. Isn't the BB AI suppossed to have some analog inputs? The corresponding section in the BB AI manual is currently empty.

Greetings, 

Stephan 

[Robert Nelson]

Analog inputs at handled by the STMPE811 chip hanging on the i2c bus. (As the am57x had no adc...)

Regards,

[Stephan Böck]

Thanks for your fast response. I should have taken a look in the schematic of the BB AI...