Beaglebone use DHCP IP, but set static IP

[Fohnbit]

Hello,

my Beaglebone should run only with a static IP.

I set this to my /etc/network/interfaces:

auto lo

iface lo inet loopback

auto eth0

iface eth0 inet static

        address 192.168.0.189

        netmask 255.255.255.0

        gateway 192.168.0.254

auto eth0:0

iface eth0:0 inet static

        address 192.168.254.189

        netmask 255.255.255.0

But he take from DHCP the IP:

root@0a800bd:/home/gd# ifconfig

eth0: flags=-28605<UP,BROADCAST,RUNNING,MULTICAST,DYNAMIC>  mtu 1500

        inet 192.168.0.75  netmask 255.255.255.0  broadcast 192.168.0.255

        inet6 fe80::3ad2:69ff:fe7a:13e9  prefixlen 64  scopeid 0x20<link>

        ether 38:d2:69:7a:13:e9  txqueuelen 1000  (Ethernet)

        RX packets 4747  bytes 967989 (945.3 KiB)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 3318  bytes 2686970 (2.5 MiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

        device interrupt 175

eth0:0: flags=-28605<UP,BROADCAST,RUNNING,MULTICAST,DYNAMIC>  mtu 1500

        inet 192.168.254.189  netmask 255.255.255.0  broadcast 192.168.254.255

        ether 38:d2:69:7a:13:e9  txqueuelen 1000  (Ethernet)

        device interrupt 175

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536

        inet 127.0.0.1  netmask 255.0.0.0

        inet6 ::1  prefixlen 128  scopeid 0x10<host>

        loop  txqueuelen 1  (Local Loopback)

        RX packets 187  bytes 14570 (14.2 KiB)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 187  bytes 14570 (14.2 KiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

I try to remove all DHCP clients ... but guess some is still active.

How can I solve this issue?

Thank you!

[evilwulfie]

beaglebone uses conman

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/cc064252-6227-4877-86d3-2078afd9e8f1%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Robert Nelson]

User examples for setting a static eth ip via connman are saved in /etc/network/interfaces 

--

[Fohnbit]

Hey,

great, I removed connman ... then not reachable over LAN and reboot: Now he has the given static IP.

Seems this was the solution!

Thank you!