U-Boot SPL 2015.01-00001-gb2412df (Jan 29 2015 - 15:01:06)
Incorrect magic number (0xffffffff) in EEPROM
Could not get board ID.
Incorrect magic number (0xffffffff) in EEPROM
Could not get board ID.
Unknown board, cannot configure pinmux.### ERROR ### Please RESET the board ###
...written to the console when I try to boot it from a uSD cards with a stock BBB image (the 2015-03-01 Debian 7.8 image). So clearly I need to get some good contents into the EEPROM.
I've been trying to hunt down instructions for how to access the U-Boot prompt to manually write the EEPROM via the i2c bus, but haven't hit any luck there.
Robert Nelson's posted links in the past to what he's described as the "factory images for flashing boards with blank EEPROMs", but those links (to rcn-ee.org) are stale/dead or behind apparently access-controlled folders on his server.
Could anyone provide a good set of instructions for getting access to a uBoot prompt from a stock flasher image OR provide current links to the blank-EEPROM manufacturing images (or equivalents) that RCN's referenced?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Could anyone provide a good set of instructions for getting access to a uBoot prompt from a stock flasher image OR provide current links to the blank-EEPROM manufacturing images (or equivalents) that RCN's referenced?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Well Intel owns McAfee, rcn-ee.com only provides ARM stuff, and i once
told an Intel recruiter x86 was boring..
Not surprised. ;)
--
Robert,It's been a while on this, but can you re-post the flasher img.xz someplace (bone-debian-7.8-lxde-4gb-armhf-2015-03-01-4gb.img.xz)?I see you've taken it down from your website and my backup copy no longer validates correctly. Since this is actually a pretty valuable tool, is there a way that it could be posted up permanantly on one of the Beaglebone websites or GitHub pages?
Thanks! Turns out my manufacturing folks were having some PEBKAC errors anyway, but thanks for pointing me to the new host.Is there any substantive difference between the USB Flasher images from various points in the Testing directory tree?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYimSNrwEhW%2B1ZgaUFSUmrO2T7M7RXP_6u8G7KDakF9-Pg%40mail.gmail.com.
Robert, so which is the blank eeprom flasher ?
Oh they are there, too... But since the 'blank' eeprom flasher's overwrite the board eeprom, the oem's need to contact me directly.. and i can point them directly to the image and tweak they need to do..With all the clones today, the days of just "BeagleBone Black" 100% clone blank eeprom are over. ;)
Regards,Yeah, I read the instructions above. So I'm curious though. Is the eeprom any different between say circuitco, and element14 BBB's ? I suppose I could dump, and diff ( if i was sure I knew how to dump correctly ).
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYizQDRCRp7Su85EPj2_30z5Hs99CGjbx%3Dp2cM60QP7FPw%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORqTKJzJLYi-7KMXqKZ46dRxZsyafXTB68g8p3tiAYc9CA%40mail.gmail.com.
Oh they are there, too... But since the 'blank' eeprom flasher's overwrite the board eeprom, the oem's need to contact me directly.. and i can point them directly to the image and tweak they need to do..With all the clones today, the days of just "BeagleBone Black" 100% clone blank eeprom are over. ;)Regards,Yeah, I read the instructions above. So I'm curious though. Is the eeprom any different between say circuitco, and element14 BBB's ? I suppose I could dump, and diff ( if i was sure I knew how to dump correctly ).
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYgcRgYTzugWHz7%3DSvrVKP2q7ObD7y_0Poz%2Bk2AsykAf8Q%40mail.gmail.com.