Re: [beagleboard] Abridged summary of beagleboard@googlegroups.com - 18 updates in 9 topics

21 views
Skip to first unread message

chinmay v

unread,
Oct 23, 2018, 10:47:09 AM10/23/18
to beagl...@googlegroups.com
Fc

On Wed 17 Oct, 2018, 4:16 PM , <beagl...@googlegroups.com> wrote:
Raghavendra Bhovi <rbhov...@gmail.com>: Oct 16 10:48PM -0700

Hi gays,
 
As the subject says, I would like to shrink the boot time below 5 seconds.
 
bellow i copied booting time captured in grab serial please tell me what
are the places i can reduce the ...more
Robert Nelson <robert...@gmail.com>: Oct 17 09:14AM -0500


> Hi gays,
 
> As the subject says, I would like to shrink the boot time below 5 seconds.
 
> bellow i copied booting time captured in grab serial please tell me what are the places i can reduce ...more
Jaroslav Sykora <jarosla...@gmail.com>: Oct 17 03:48AM -0700

Hello,
 
We have a problem with a destroyed notebook USB port when it was connected
to BeagleBone Black.
Our system: we designed an extension board connected to the BBB pin-headers ...more
Gerhard Hoffmann <g...@hoffmann-hochfrequenz.de>: Oct 17 01:52PM +0200

The mini-USB power is connected to the BBB power. I can run my BBB just
from the USB cable.
 
So you probably just paralleled 2 power supplies. The list of outcomes
includes the escape
...more
Robert Nelson <robert...@gmail.com>: Oct 17 09:09AM -0500

On Wed, Oct 17, 2018 at 5:48 AM Jaroslav Sykora <jarosla...@gmail.com>
wrote:
 
> work after that.
 
> Any idea why this could happen? So far it seems like an one-off event, but ...more
OMag <om62...@gmail.com>: Oct 17 06:38AM -0700

Hi Andrew
 
What would the advantage of the switch be over something like the TI
DP83630? I have updated the schematics to the latest version in Altium and
am currently at the point where I need ...more
John Syne <john...@gmail.com>: Oct 16 03:36PM -0700

I just did a quick search on Github for Starterware and found this:
 
https://github.com/kiran4399/starterware_PRU <https://github.com/kiran4399/starterware_PRU>
 
 
Regards,
John
 
 
 
 
 
...more
John Syne <john...@gmail.com>: Oct 16 03:40PM -0700

From what I read, TI are no longer maintaining Starterware, but there is a community driven development on Sourceforge:
 
https://sourceforge.net/projects/starterwarefree/ ...more
"Peter Armbrüster" <peter.ar...@netcologne.de>: Oct 17 12:49AM +0200

Great!
 
Thank you very much.
 

 
Best wishes
 

 
Peter.
 

 

 

 
Von: beagl...@googlegroups.com [mailto:beagl...@googlegroups.com] Im Auftrag von John Syne
...more
John Syne <john...@gmail.com>: Oct 16 07:43PM -0700

BTW, you mentioned moving to Zynq, but that processor is more expensive than the complete BBB. Zynq eval boards or kits are even more expensive, not to mention the cost of tools, etc. ...more
Gerhard Hoffmann <g...@hoffmann-hochfrequenz.de>: Oct 17 01:20PM +0200

First, a lot of thanks for the pointer, that could really help.
 
 
What I really want to accomplish is to get at least a medium bandwidth
interface
 
between the LAN and some real-time data ...more
true...@web.de: Oct 17 05:47AM -0700

Hi Gerhard,
Maybe this 2 points helps for the Problem "bus errors":
 
1.
I had the same Problems at the standard Starterware mcspi, if I forget
"McSPI0ModuleClkConfig" in my Setup.
 
2. ...more
Raghavendra Bhovi <rbhov...@gmail.com>: Oct 17 05:07AM -0700

Hi Brent,
 
i am new to linux and beaglebone ,I would like to decrease the boot
time below 5 seconds
 
 
Here is the hardware I need:
1. LCD7 cape
2.buzzer cape
2. USB
3. GPIO
...more
sarfar...@gmail.com: Oct 17 04:43AM -0700

can u post your DDR timings from ddr_defs.h file from uboot.
 
Thanks,
Sarfaraz
 
On Thursday, 15 March 2018 14:27:31 UTC+5:30, Eric Schm. wrote:
...more
engrmas...@gmail.com: Oct 16 11:22PM -0700

Hi,
I have gps with pps and signal level is measured in scope and is ok. The problem is that when ppstest command is run the pps output is displayed as ok but after arround 180 to 230 seconds i get ...more
Tarmo Kuuse <tarmo...@gmail.com>: Oct 17 01:15AM -0700

Hi!
 
For context - I'm preparing a batch of some BBB compatible devices and I'd
love to install the same Debian version on them over the next few years.
Buster seems like a forward-looking ...more
stephen....@gmail.com: Oct 16 07:21AM -0700

The magnetics was replaced as well. I used the PulseR 1000B-5002X
 
On Monday, October 15, 2018 at 5:05:03 PM UTC-6, Wulf Man wrote:
...more
Roger Quadros <rog...@ti.com>: Oct 16 05:35PM +0300

Hi Stephen,
 
DP83867IR is a tricky PHY to use due to its quasi state bootstrap pins. Each pin can have 4 states.
 
You will need to use strong pull up/down on the bootstrap pins to ensure that it ...more
You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page.
To unsubscribe from this group and stop receiving emails from it send an email to beagleboard...@googlegroups.com.

evilwulfie

unread,
Oct 23, 2018, 11:09:13 AM10/23/18
to beagl...@googlegroups.com
Please dont do this again. Thanks.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAJzBG71PKMADU%3DgGTb2wn3i0%2B5o%3DG%2Bc0ne-79Duj2syf5BK1NQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Reply all
Reply to author
Forward
0 new messages