JTAG debug on BeagleBone Black?

190 views
Skip to first unread message

Drew Fustini

unread,
Feb 17, 2020, 10:27:26 AM2/17/20
to Beagle Board, beaglebonegroup
Hello, I would like to figure out something more sophisticated than printk for debugging the kernel on BeagleBone.  (I'm trying to the new gpiolib pull-up/down options to the omap gpio driver).

Is anyone using JTAG debug on the BBB?

If so, what JTAG adapter are you using, and what connector did you solder to the Beagle?

Thanks
Drew


Hugo van den Brand

unread,
Feb 17, 2020, 3:03:57 PM2/17/20
to beagl...@googlegroups.com
The system reference mentions which JTAG connector you need:



Op ma 17 feb. 2020 16:27 schreef Drew Fustini <pdp7...@gmail.com>:
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAEf4M_DAZyR-00emfyQJ5oGke1_CnW4k14dAJ4NKkxVHOfF2pA%40mail.gmail.com.

Mark Lazarewicz

unread,
Feb 17, 2020, 3:32:24 PM2/17/20
to beagl...@googlegroups.com
And if you have a white no soldering


Reply all
Reply to author
Forward
0 new messages