PocketBeagle USB-C

24 views
Skip to first unread message

achala...@gmail.com

unread,
Aug 17, 2020, 9:25:49 AM8/17/20
to BeagleBoard
Hi All
I'm starting to delve into this
can someone please advise how can i connect USB-C Breakout board to PocketBeagle

Robert Nelson

unread,
Aug 17, 2020, 9:43:21 AM8/17/20
to Beagle Board
Type-C has two more pins.. CC1 and CC2 which help determine
orientation. Whereas the PocketBeagle is only USB2.0..

https://www.sparkfun.com/products/15100

Connect each CC* pin to gnd with their own 5.1k resistor

Regards,

--
Robert Nelson
https://rcn-ee.com/

Graham Haddock

unread,
Aug 17, 2020, 12:46:33 PM8/17/20
to BeagleBoard
Another choice:
Adafruit USB C Breakout Board - Downstream Connection PRODUCT ID: 4090
Digi-Key Part Number   1528-2873-ND  

Instructions at

It already has the two resistors on it, that Robert referred to. 

--- Graham

Robert Nelson

unread,
Aug 17, 2020, 1:11:24 PM8/17/20
to Beagle Board
On Mon, Aug 17, 2020 at 11:46 AM Graham Haddock <gra...@flex-radio.com> wrote:
>
> Another choice:
> Adafruit USB C Breakout Board - Downstream Connection PRODUCT ID: 4090
> Digi-Key Part Number 1528-2873-ND
>
> Instructions at
> https://www.adafruit.com/product/4090
>
> It already has the two resistors on it, that Robert referred to.

Nice! Yeah, that would be much better..

Achal Aggarwal

unread,
Aug 17, 2020, 5:06:27 PM8/17/20
to beagl...@googlegroups.com
CC1 & CC2 pins from USB-C that you mentioned, which pins on the breakout board of pocket eagle so I connect them too

Thanks

--


For more options, visit http://beagleboard.org/discuss


---


You received this message because you are subscribed to a topic in the Google Groups "BeagleBoard" group.


To unsubscribe from this topic, visit https://groups.google.com/d/topic/beagleboard/kzrWxwvQ-Sc/unsubscribe.


To unsubscribe from this group and all its topics, send an email to beagleboard...@googlegroups.com.


To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/7305f081-bab6-472a-9675-0cbff906d447n%40googlegroups.com.


--
Regards,
Achal Aggarwal

Robert Nelson

unread,
Aug 17, 2020, 5:10:09 PM8/17/20
to Beagle Board
On Mon, Aug 17, 2020 at 4:06 PM Achal Aggarwal <achala...@gmail.com> wrote:
>
> CC1 & CC2 pins from USB-C that you mentioned, which pins on the breakout board of pocket eagle so I connect them too

You don't connect them to anything "on" the PocketBeagle.. Take a
look at your breakout board, as we don't know which version you have..

Just make sure CC1 and CC2 have their own 5.1K resistor tied to Ground..
Reply all
Reply to author
Forward
0 new messages