Question: were you ever able to login to these machines in the past?
(Obvious, but needs to be asked): do you have the caps lock key on? The stock
username and password are in all *lower case* and both the username and
password are case sensitive.
Are these machines running a stock microSD image?
>
>
> On Sun, Mar 28, 2021 at 9:47 AM jonnymo <
jonn...@gmail.com> wrote:
>
> > What is the error that you are seeing when the login fails?
> >
> > Jon
> >
> > On Sun, Mar 28, 2021 at 9:39 AM Bob Hammond <
propg...@gmail.com> wrote:
> >
> >> PuTTY (and WinSCP) are used on a host PC running Windows 7 Professional.
> >> Yes, I'm certain of the IPs for both BBB. Both BBB are connected to my
> >> network via hardwire to a switch.
> >>
> >> I can see both BBB using web pages (and therefore IP addresses) I set up
> >> on them. Both are running ok. Both ping ok. Both can be accessed via
> >> PuTTY and WinSCP.
> >> So, they are functional.
> >>
> >> I just simply cannot log into them with any known username/password.
> >>
> >> Bob
> >>
> >> On Sun, Mar 28, 2021 at 9:32 AM jonnymo <
jonn...@gmail.com> wrote:
> >>
> >>> Are you using Windows or Linux on your host PC? Since you mention
> >>> PuTTY, I would assume it is windows.
> >>> You could try to connect to the BB using the USB Network options:
> >>>
> >>>
https://www.digikey.com/en/maker/blogs/how-to-connect-a-beaglebone-black-to-the-internet-using-usb
> >>>
> >>> Are you certain the IP you are connecting to is the new BB?
> >>> How is the BB connected to your network?
> >>>
> >>> If you can get a serial or USB Network connection you can check for the
> >>> IP with"
> >>> $ *ip a*
> >>>
> >>> If you have another Linux system on your network, you can scan for IPs
> >>> with the following:
> >>> NOTE: Chane 192.168.1.x to what is appropriate for your network.
> >>> $ *for i in {1..255}; do (ping 192.168.1.$i -c 1 -w 5 >/dev/null
> >>> && echo "192.168.1.$i" &); done*
> >>>
> >>> Cheers,
> >>>
> >>> Jon
> >>>
> >>> On Sun, Mar 28, 2021 at 5:48 AM Bob Hammond <
propg...@gmail.com>
> >>> wrote:
> >>>
> >>>> I am using a windows machine with PuTTY to connect to the BBB.
> >>>>
> >>>> On Sun, Mar 28, 2021 at 5:44 AM Bob Hammond <
propg...@gmail.com>
> >>>> wrote:
> >>>>
> >>>>> I am able to connect to the BBB with PuTTY and get a prompt to log
> >>>>> in. I have tried debian/temppwd and that doesn't work.
> >>>>>
> >>>>> I've read about using a serial connection to the BBB and interrupting
> >>>>> the boot sequence to gain access. Anyone done that?
> >>>>>
> >>>>> On Saturday, March 27, 2021 at 4:41:30 PM UTC-7
myi...@hotmail.com
> >>>>> wrote:
> >>>>>
> >>>>>> Try logging in as user : debian
> >>>>>> Password: temppwd
> >>>>>>
> >>>>>> Check your spelling after u enter user name
> >>>>>>
> >>>>>> Sent from my iPhone
> >>>>>>
> >>>>>> On Mar 27, 2021, at 7:12 PM, amf <
fitte...@gmail.com> wrote:
> >>>>>>
> >>>>>> 
> >>>>>>
> >>>>>> I followed your instructions, once I obtained the new ip, I was able
> >>>>>> to login as the user of the origanl BBB.
> >>>>>> Without knowing details of your setup it is difficult to help
> >>>>>> is your desktop/laptop a windows or linux machine?
> >>>>>> if linux you can get the ip of the new BBB with "ping
> >>>>>> <hostname>.local" provided 'avahi' is installed (there may be other ways,
> >>>>>> this works for me)
> >>>>>>
> >>>>>> ping beaglebone.local
> >>>>>> PING beaglebone.local (192.168.3.108) 56(84) bytes of data.
> >>>>>> 64 bytes from
192.168.3.108: icmp_seq=1 ttl=64 time=1.31 ms
> >>>>>>
> >>>>>> if windows, someone else will need to chime in,
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> On Saturday, March 27, 2021 at 7:39:21 AM UTC-5
propg...@gmail.com
> >>>>>> wrote:
> >>>>>>
> >>>>>>> I duplicated my BBB setup to a SD card using this procedure:
> >>>>>>>
> >>>>>>> Debian distribution:
> >>>>>>>
> >>>>>>> 1. Boot master BBB with no SD card in
> >>>>>>> 2. Insert SD card
> >>>>>>> 3. Log in (e.g. with serial terminal, SSH etc.) and run sudo
> >>>>>>> /opt/scripts/tools/eMMC/beaglebone-black-make-microSD-flasher-from-eMMC.sh.
> >>>>>>> LEDs will flash in sequence whilst SD card is being written.
> >>>>>>> 4. When the LEDs stop and the script terminates, remove the SD
> >>>>>>> card.
> >>>>>>> 5. Insert SD card into new BBB then power on.
> >>>>>>> 6. eMMC will be flashed; LEDs on new BBB will flash in sequence
> >>>>>>> until complete.
> >>>>>>>
> >>>>>>> After doing this, I rebooted the BBB.
> >>>>>>>
> >>>>>>> Now, I am unable to remotely log in using PuTTY, user is root, and
> >>>>>>> root password. Or any other username and password.
> >>>>>>>
> >>>>>>> The BBB is running fine (collecting seismic data) but I am
> >>>>>>> completely locked out!
> >>>>>>>
> >>>>>>> Any suggestions on how to get access to the BBB?
> >>>>>>>
> >>>>>> --
> >>>>>> For more options, visit
http://beagleboard.org/discuss
> >>>>>> ---
> >>>>>> You received this message because you are subscribed to the Google
> >>>>>> Groups "BeagleBoard" group.
> >>>>>> To unsubscribe from this group and stop receiving emails from it,
> >>>>>> send an email to
beagleboard...@googlegroups.com.
> >>>>>> To view this discussion on the web visit
> >>>>>>
https://groups.google.com/d/msgid/beagleboard/833795ff-61b4-418c-a142-9aed980e01a7n%40googlegroups.com
> >>>>>> <
https://groups.google.com/d/msgid/beagleboard/833795ff-61b4-418c-a142-9aed980e01a7n%40googlegroups.com?utm_medium=email&utm_source=footer>
> >>>>>> .
> >>>>> <
https://groups.google.com/d/msgid/beagleboard/0fea8e1c-4c08-43cc-a023-5fce0b05209en%40googlegroups.com?utm_medium=email&utm_source=footer>
> >>>>> .
> >>>>>
> >>>> --
> >>>> For more options, visit
http://beagleboard.org/discuss
> >>>> ---
> >>>> You received this message because you are subscribed to the Google
> >>>> Groups "BeagleBoard" group.
> >>>> To unsubscribe from this group and stop receiving emails from it, send
> >>>> an email to
beagleboard...@googlegroups.com.
> >>>> To view this discussion on the web visit
> >>>>
https://groups.google.com/d/msgid/beagleboard/CAKoB7OpieQonkXW003iq5APE2Ze74UMWBOrpNXF6q%3DSp8vZwMg%40mail.gmail.com
> >>>> <
https://groups.google.com/d/msgid/beagleboard/CAKoB7OpieQonkXW003iq5APE2Ze74UMWBOrpNXF6q%3DSp8vZwMg%40mail.gmail.com?utm_medium=email&utm_source=footer>
> >>>> .
> >>>
https://groups.google.com/d/msgid/beagleboard/CAG99bkrwOYSFqTC3u8x3CobrjSaF25HMKqCDsBoxWufCxi%2Bjeg%40mail.gmail.com
> >>> <
https://groups.google.com/d/msgid/beagleboard/CAG99bkrwOYSFqTC3u8x3CobrjSaF25HMKqCDsBoxWufCxi%2Bjeg%40mail.gmail.com?utm_medium=email&utm_source=footer>
> >>> .
> >>>
> >> --
> >> For more options, visit
http://beagleboard.org/discuss
> >> ---
> >> You received this message because you are subscribed to the Google Groups
> >> "BeagleBoard" group.
> >> To unsubscribe from this group and stop receiving emails from it, send an
> >> email to
beagleboard...@googlegroups.com.
> >>
> > To view this discussion on the web visit
> >>
https://groups.google.com/d/msgid/beagleboard/CAKoB7Ootoj6dw%3Dc3ut2pRy3%3Dnfo7diE6%2BBjp3b5WnSB3JmPdwQ%40mail.gmail.com
> >> <
https://groups.google.com/d/msgid/beagleboard/CAKoB7Ootoj6dw%3Dc3ut2pRy3%3Dnfo7diE6%2BBjp3b5WnSB3JmPdwQ%40mail.gmail.com?utm_medium=email&utm_source=footer>
> >> .
> >
https://groups.google.com/d/msgid/beagleboard/CAG99bkp%2BCm4QPNnVPLiLpEF664GqGoXovcfHw3HWFPWyoid1-A%40mail.gmail.com
> > <
https://groups.google.com/d/msgid/beagleboard/CAG99bkp%2BCm4QPNnVPLiLpEF664GqGoXovcfHw3HWFPWyoid1-A%40mail.gmail.com?utm_medium=email&utm_source=footer>
> > .
> >
>
--
Robert Heller -- Cell:
413-658-7953 GV:
978-633-5364
Deepwoods Software -- Custom Software Services
http://www.deepsoft.com/ -- Linux Administration Services
hel...@deepsoft.com -- Webhosting Services