BeagleBone Green does not work after kernel update

[zuzh...@gmail.com]

Hi everyone

I have a BeagleBone Green on my hand and ran with a old kernel from 2017. 

I notice the device has some issues and they may lie in the kernel, so I did a kernel update as instructed here.

After the update, I tried to reboot it but it never came up again, so I unplugged the power and powered on again. 

The BeagleBone started, but I couldn't SSH to the device. And the USB is enumerated as USB COM PORT on my PC (WIN10 64bits)

I tried many things to bring it back but it didn't work.

What should I do now? Should I re-flash the whole image with SD card?

Thanks a lot in advance!

[jonnymo]

Do you have an FTDI cable you can connect to the BBG?

https://wiki.seeedstudio.com/BeagleBone_Green/

Also, on your Win10 system, are you getting the Remote NDIS Ethernet interface show for the BBG ?

If you are. check the IP address assigned to this.  If you had a shared connection on your Win10 system for the BBG, disable the shared connect and try resetting the USB connection again.

If not, perhaps a driver is missing.

Cheers,

Jon

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/d3f49148-69a6-4def-834e-4f054eef6effo%40googlegroups.com.

[set_]

Hello,

Use the serial console instead of ssh. Then, use this command: ip addr. Find what the ip address to your machine is currently. Then, use that to sign in.

Seth

[willy simangunsong]

Hello everyone, I need a hand from all of you, if you have a driver for BBG, please reply my email

Regards,