error at boot in the image : bone-debian-8.4-lxqt-4gb-armhf-2016-04-25-4gb

[Micka]

Starting kernel ...

[    3.540286] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle

[    3.788349] cpu cpu0: cpu0 clock notifier not ready, retry

[    3.939012] bone_capemgr bone_capemgr: slot #0: No cape found

[    3.999007] bone_capemgr bone_capemgr: slot #1: No cape found

[    4.059010] bone_capemgr bone_capemgr: slot #2: No cape found

[    4.119005] bone_capemgr bone_capemgr: slot #3: No cape found

Loading, please wait...

fsck: error 2 (No such file or directory) while executing fsck.ext4 for /dev/mmc                                        blk0p1

fsck exited with status code 8

[   11.750782] systemd[1]: Failed to set memory.limit_in_bytes on : Invalid argu                                        ment

[   12.536934] systemd-fsck[164]: rootfs: clean, 133831/217728 files, 795110/870                                        144 blocks

[   21.686784]  remoteproc1: failed to load am335x-pru0-fw

[   21.766819]  remoteproc1: request_firmware failed: -2

[   21.772016] pru-rproc 4a334000.pru0: rproc_boot failed

[   21.970925]  remoteproc1: failed to load am335x-pru1-fw

[   21.984090]  remoteproc1: request_firmware failed: -2

[   21.989339] pru-rproc 4a338000.pru1: rproc_boot failed

[Robert Nelson]

Hi Micka,

Correct, there are a few of them, which one is catching your eye that needs some explaining..

Regards,

--

Robert Nelson
https://rcn-ee.com/

[Micka]

this one : 

fsck: error 2 (No such file or directory) while executing fsck.ext4 for /dev/mmc                                        blk0p1

I don't understand it. 

also, how do you set the IP address on jessie ? 

/etc/network/interfaces ?

auto eth0

iface eth0 inet static

        address 100.91.120.21

        netmask 255.255.255.0

        gateway 100.91.120.254

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYha_fFaJrVSy5PviyAEEVEr8uen7zi7LEfTxBYhGy3c1A%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[Robert Nelson]

On Mon, May 2, 2016 at 7:58 AM, Micka <micka...@gmail.com> wrote:

this one : 

fsck: error 2 (No such file or directory) while executing fsck.ext4 for /dev/mmc                                        blk0p1

I don't understand it. 

ignore it, initramfs-tools bug...

 

also, how do you set the IP address on jessie ? 

/etc/network/interfaces ?

auto eth0

iface eth0 inet static

        address 100.91.120.21

        netmask 255.255.255.0

        gateway 100.91.120.254

connman is under control of eth0..

Regards,