Re: Requesting for the BeagleBoneGreen Wireless Schematics and PCB Design Files

[Jason Kridner]

Ani,

Please check the wiki link at http://www.seeedstudio.com/wiki/Beaglebone_green

Seeed used Cadence OrCAD to modify the schematics and Cadence Allegro for the PCB design tool.

Regards,

Jason

On Mon, Jul 11, 2016 at 2:24 PM Ani <ep.an...@gmail.com> wrote:

Hello Jason,

I apologies that I did not CC beagl...@googlegroups.com in the email as I did not know about that. I have kept beagl...@googlegroups.com in CC now.

Thank you,

Best Regards,

Aniketh Esamudra Prakash,

MS, Electrical Engineering,

The Henry Samueli School of Engineering,

University of California,Irvine

Cell: 949-562-8079

www.linkedin.com/in/anikethesamudraprakash

On Mon, Jul 11, 2016 at 10:24 AM, Ani <ep.an...@gmail.com> wrote:

Hello Christine,

Thank you very much for directing me to Jason Kridner. I would be eagerly waiting for the response.

Thank you for your time,

Best Regards,

Aniketh Esamudra Prakash,

MS, Electrical Engineering,

The Henry Samueli School of Engineering,

University of California,Irvine

Cell: 949-562-8079

www.linkedin.com/in/anikethesamudraprakash

On Sat, Jul 9, 2016 at 8:03 PM, Christine Long <chr...@beagleboard.org> wrote:

Ani,

I've included Jason Kridner in this email chain as he will be able to assist you with this question. 

Thanks

Christine

Begin forwarded message:

From: Ani <ep.an...@gmail.com>
Date: July 8, 2016 at 5:37:06 PM EDT
To: chr...@beagleboard.org
Subject: Requesting for the BeagleBoneGreen Wireless Schematics and PCB Design Files

Hello Christine,

I am Aniketh Esamudra Prakash. I completed my MS in Electrical Engineering from University of California, Irvine.

First of all, I would like to thank you for giving out this wonderful BeagleBone Green Wireless product to the tech community. 

I was able to open all your previous BeagleBone Series Boards in Altium. But, now I am trying to open the BeagleBone Green Wireless Schematics & PCB Files and I am unable to open them in Altium. 

I was curious about the EDA tool which you used to make the BeagleBone Green Wireless Design. I would also request you for the BeagleBone Green Wireless Hardware Files so that I could learn more and get the better understanding. Could you please share me the hardware files?

 

I would be eagerly waiting for your response.

Thank you for your time,

Best Regards,

Aniketh Esamudra Prakash,

MS, Electrical Engineering,

The Henry Samueli School of Engineering,

University of California,Irvine

Cell: 949-562-8079

www.linkedin.com/in/anikethesamudraprakash

[Jason Kridner]

On Mon, Jul 11, 2016 at 6:34 PM Ani <ep.an...@gmail.com> wrote:

Hello Jason,

Thank you for the response. I had tried before to import the hardware files into Altium using the files downloaded from this website. I was able to import the schematics but not the PCB files. I was wondering if you could share me the files. It could be of great help!

The schematic at the link. I'm not sure why you are asking for it.

 

I also want to work on the PRUs that are present on the BBG Wireless. There are lot many form posts for BBB but not for BBG Wireless. Is it the same procedures(BBB PRUs procedures) to work on PRUs on BBG Wireless? Could you please help me?

Same processor, same procedures.

 

Thank you for your time,

Best Regards,

Aniketh Esamudra Prakash,

MS, Electrical Engineering,

The Henry Samueli School of Engineering,

University of California,Irvine

Cell: 949-562-8079

www.linkedin.com/in/anikethesamudraprakash

[Ani]

[Ani]

Hello Jason,

Thank you for the response. I had tried before to import the hardware files into Altium using the files downloaded from this website. I was able to import the schematics but not the PCB files. I was wondering if you could share me the files. It could be of great help!

I also want to work on the PRUs that are present on the BBG Wireless. There are lot many form posts for BBB but not for BBG Wireless. Is it the same procedures(BBB PRUs procedures) to work on PRUs on BBG Wireless? Could you please help me?

Thank you for your time,

Best Regards,

Aniketh Esamudra Prakash,

MS, Electrical Engineering,

The Henry Samueli School of Engineering,

University of California,Irvine

Cell: 949-562-8079

www.linkedin.com/in/anikethesamudraprakash

On Mon, Jul 11, 2016 at 12:18 PM, Jason Kridner <jkri...@gmail.com> wrote:

[John Syne]

The Altium Allegro import requires that Allegro PCB be exported in ASCII format.

Regards,

John

On Jul 11, 2016, at 3:34 PM, Ani <ep.an...@gmail.com> wrote:

Hello Jason,

Thank you for the response. I had tried before to import the hardware files into Altium using the files downloaded from this website. I was able to import the schematics but not the PCB files. I was wondering if you could share me the files. It could be of great help!

I also want to work on the PRUs that are present on the BBG Wireless. There are lot many form posts for BBB but not for BBG Wireless. Is it the same procedures(BBB PRUs procedures) to work on PRUs on BBG Wireless? Could you please help me?

Thank you for your time,

Best Regards,

Aniketh Esamudra Prakash,

MS, Electrical Engineering,

The Henry Samueli School of Engineering,

University of California,Irvine

Cell: 949-562-8079

www.linkedin.com/in/anikethesamudraprakash

On Mon, Jul 11, 2016 at 12:18 PM, Jason Kridner <jkri...@gmail.com> wrote:

Ani,

Please check the wiki link at http://www.seeedstudio.com/wiki/Beaglebone_green

<pasted1.png>

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAALg6LkgzSD8L%3DJPpWrm7V%3DjHHRqumZrwoXzD72Sz5bwAmtqwA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.