Boot problem on BBB Rev C Debian 7.4

[slowj...@sbcglobal.net]

So my Rev C has arrived.  When it boots I see one error:

spl_load_image_fat_os: error reading image args, err - -1

 and one warning:

*** Warning - readenv() failed, using default environment

I've searched for the error, but can't find anything helpful.  I'm a noob, so would someone kindly point me in the right direction. 

Thanks in advance,

Dwight




root@beaglebone:~# cat /etc/debian_version
7.4
root@beaglebone:~# reboot -f
[  931.817654] (NULL device *): gadget not registered.
[  931.823689] Restarting system.

U-Boot SPL 2014.04-00015-gb4422bd (Apr 22 2014 - 13:24:29)
reading args
spl_load_image_fat_os: error reading image args, err - -1
reading u-boot.img
reading u-boot.img


U-Boot 2014.04-00015-gb4422bd (Apr 22 2014 - 13:24:29)

I2C:   ready
DRAM:  512 MiB
NAND:  0 MiB
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning - readenv() failed, using default environment

Net:   <ethaddr> not set. Validating first E-fuse MAC
cpsw, usb_ether
Hit any key to stop autoboot:  0
gpio: pin 53 (gpio 53) value is 1
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
SD/MMC found on device 0
** File not found uEnv.txt **
Checking if uenvcmd is set ...

uenvcmd was not defined in uEnv.txt ...
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
mmc1(part 0) is current device
gpio: pin 54 (gpio 54) value is 1
SD/MMC found on device 1
reading uEnv.txt
1430 bytes read in 5 ms (279.3 KiB/s)
gpio: pin 55 (gpio 55) value is 1
Loaded environment from uEnv.txt
Importing environment from mmc ...
Checking if uenvcmd is set ...
gpio: pin 56 (gpio 56) value is 1
Running uenvcmd ...
reading zImage
3717760 bytes read in 205 ms (17.3 MiB/s)
reading initrd.img
2870013 bytes read in 161 ms (17 MiB/s)
reading /dtbs/am335x-boneblack.dtb
25080 bytes read in 9 ms (2.7 MiB/s)
Kernel image @ 0x82000000 [ 0x000000 - 0x38ba80 ]
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Using Device Tree in place at 88000000, end 880091f7

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.381227] omap2_mbox_probe: platform not supported
[    0.548027] tps65217-bl tps65217-bl: no platform data provided
[    0.612208] bone-capemgr bone_capemgr.9: slot #0: No cape found
[    0.649316] bone-capemgr bone_capemgr.9: slot #1: No cape found
[    0.686423] bone-capemgr bone_capemgr.9: slot #2: No cape found
[    0.723532] bone-capemgr bone_capemgr.9: slot #3: No cape found
[    0.739689] bone-capemgr bone_capemgr.9: slot #6: BB-BONELT-HDMIN conflict P8.45 (#5:BB-BONELT-HDMI)
[    0.749299] bone-capemgr bone_capemgr.9: slot #6: Failed verification
[    0.756053] bone-capemgr bone_capemgr.9: loader: failed to load slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[    0.772610] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed
[    0.835142] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8
[    0.846833] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22
[    0.854130] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
Loading, please wait...
Scanning for Btrfs filesystems
systemd-fsck[210]: rootfs: clean, 77151/230144 files, 378491/919296 blocks
Press enter for maintenance(or type Control-D to continue):  enter default mode.
[  305.244488] libphy: PHY 4a101000.mdio:01 not found
[  305.249633] net eth0: phy 4a101000.mdio:01 not found on slav

[Robert Nelson]

On Thu, Jul 3, 2014 at 8:38 AM, <slowj...@sbcglobal.net> wrote:
> So my Rev C has arrived. When it boots I see one error:
>
> spl_load_image_fat_os: error reading image args, err - -1
>
> and one warning:
>
> *** Warning - readenv() failed, using default environment
>
> I've searched for the error, but can't find anything helpful. I'm a noob,
> so would someone kindly point me in the right direction.

It's nothing to worry about.

Regards,

--
Robert Nelson
http://www.rcn-ee.com/

[vish chopra]

Please provide the solution for this