external clocking to Beagle Bone Black by OCXO 12.80001 MHz by replacing Y2=12.80001 MHz

[ansari...@gmail.com]

Dear All,

     Pls suggest me how to clock externally by OCXO 12.80001 MHz by replacing Y2=24 MHz. 

Also suggest what actions will be required  in uboot/kernel/userspace...etc...

Thanks

Ansari.

[Graham]

You might help your self by explaining why you might want to do this.

In other words, what is the problem you are trying to solve.

Since 24 MHz is the master clock for the CPU, changing it will break all the 

timing systems, time, serial ports, anything using or depending on time or frequency.

And since there are internal PLLs in the Sitara, there are limits as to how

far you can move.

You might be better off designing a little hardware circuit that would 

take 12.8 as an input and provide a phase locked 24 MHz as an output.

Or leaving the master clock on the Sitara alone, and learning how to

move data across clock domain boundaries.

--- Graham

==

[Robert Nelson]

Along with patching u-boot & kernel, you'll also need to change a few
"sysboot" pin's so the boot rom knows it's 12Mhz..

Regards,

--
Robert Nelson
https://rcn-ee.com/