Opencv4
25 views
Skip to first unread message
Bill Barnett
Sep 4, 2020, 7:20:30 PM9/4/20
to beagl...@googlegroups.com
Is there an opencv version 4.x package for the beaglebone black? I do not have enough room on my BBBlack to build opencv4 from source.
--
Bill Barnett
Dennis Lee Bieber
Sep 4, 2020, 9:38:35 PM9/4/20
to Beagleboard
On Fri, 4 Sep 2020 18:20:02 -0500, in gmane.comp.hardware.beagleboard.user
Bill Barnett <wm.b.barnett-Re5J...@public.gmane.org> wrote:
>Is there an opencv version 4.x package for the beaglebone black? I do not
>have enough room on my BBBlack to build opencv4 from source.
>
By "enough room" do you mean RAM, or do you mean eMMC (file system)?
Bill Barnett <wm.b.barnett-Re5J...@public.gmane.org> wrote:
>Is there an opencv version 4.x package for the beaglebone black? I do not
>have enough room on my BBBlack to build opencv4 from source.
>
If the latter, then using a large uSD card is probably part of the
solution. If the former, a large uSD card with a swap file defined /might/
be part of the solution.
Other than that, setting up a cross-build environment on a Linux box
might be feasible.
--
Dennis L Bieber
Reply all
Reply to author
Forward
0 new messages