DHCP issues

[Kurt Talke]

Hi Jason, James,

I’m running Debian 8.8 from 7/1/17, and I’m having an issue where the BBB no longer shows up as the default IP 192.168.7.2

I’ve narrowed it down to the script which enables the device tree overlay, or installing the robotics cape from source code.

Once I reboot, my BBB shows up as a self assigned IP 169.254.44.139, and I can’t connect to it.

The DT script works for 8.7, but not 8.8 or the 9.1 versions.

Any ideas?



-Kurt

[Jason Kridner]

Can you provide a journal log?

Can you check the status of dnsmasq and connman processes?

Which script are you calling the "DT script"? https://github.com/StrawsonDesign/Robotics_Cape_Installer/blob/master/install.sh ?  https://github.com/StrawsonDesign/Robotics_Cape_Installer/blob/master/device_tree/configure_robotics_dt.sh ? 

--

https://beagleboard.org/about

[Kurt Talke]

Jason,

After the IP address changes I’m unable to log in.

Basically, I flashed with Debian 8.8, then ran the configure_robotics_dt.sh script.

After rebooting,

I can no longer log in.

should be easy to duplicate.

-K

[Robert Nelson]

On Aug 2, 2017 1:29 PM, "Kurt Talke" <kta...@eng.ucsd.edu> wrote:

Jason,

After the IP address changes I’m unable to log in.

Basically, I flashed with Debian 8.8, then ran the configure_robotics_dt.sh script.

After rebooting,

I can no longer log in.

should be easy to duplicate.

Use an older release, with the conversation to u-boot overlays, that dt script won't work. I have that cape and need to push it out my fixes.

Busy with family stuff, so it won't be till next week.

Regards,

-K

On Aug 2, 2017, at 9:24 AM, Jason Kridner <jkri...@gmail.com> wrote:

Can you provide a journal log?

Can you check the status of dnsmasq and connman processes?

Which script are you calling the "DT script"? https://github.com/StrawsonDesign/Robotics_Cape_Installer/blob/master/install.sh ?  https://github.com/StrawsonDesign/Robotics_Cape_Installer/blob/master/device_tree/configure_robotics_dt.sh ? 

On Mon, Jul 31, 2017 at 6:08 PM Kurt Talke <kta...@eng.ucsd.edu> wrote:

Hi Jason, James,

I’m running Debian 8.8 from 7/1/17, and I’m having an issue where the BBB no longer shows up as the default IP 192.168.7.2

I’ve narrowed it down to the script which enables the device tree overlay, or installing the robotics cape from source code.

Once I reboot, my BBB shows up as a self assigned IP 169.254.44.139, and I can’t connect to it.

The DT script works for 8.7, but not 8.8 or the 9.1 versions.

Any ideas?



-Kurt

--

https://beagleboard.org/about

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscribe@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/E11C7FFC-B7DB-48FC-874F-CBDA1B3DFB41%40eng.ucsd.edu.

For more options, visit https://groups.google.com/d/optout.