Cyclops for Beaglebone Black

[Chao]

 The exposed Cyclops method is employed to guarantee a synchronised speed between CPU and RPU of the Beaglebone Black.  While it always says the error when configures pins through all required overlays have been installed and loaded as the README introduction.

/sys/devices/ocp.*/P8_46_pinmux.*/state: No such file or directory

Overlays are loaded:

 0: 54:PF--- 

 1: 55:PF--- 

 2: 56:PF--- 

 3: 57:PF--- 

 4: ff:P-O-- Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G

 5: ff:P-O-- Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI

 6: ff:P-O-- Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN

 7: ff:P-O-L Override Board Name,00A0,Override Manuf,NESL-PRU

 8: ff:P-O-L Override Board Name,00A0,Override Manuf,NESL-PRU-PINS

 9: ff:P-O-L Override Board Name,00A0,Override Manuf,NESL-PRU-QOT

In my view, the problem probably occurs in the NESL-PRU-PINS, which I cannot find out its dts file in upload files, thanks. 

[Chao]

Solved, it actually does not configure in the DOT...