Changing the default state of the GPIOs on BBB

[Raulp]

Is there a software way to get and change the default state of the GPIOs?

Thanks in advance !

Rgds,

Rp

[William Hermans]

Sure, as soon as the board is up, and has loaded the intrd img, you toggle the GPIO's into the state you wish. Otherwise, you need to read the TRM, and pick your GPIOs according to GPIO pin default state.

Either that, or isolate your circuits and not worry about it.

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/225d9026-5f3b-4397-8477-2d8f11bd06e3%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.