How to restore BeagleBoard-X15 to its default image?

[Felicity Lv]

Hello,

I recently flashed a new eMMC image to the BeagleBoard-x15, later found out that it's not an image I want. How do I restore the BeagleBoard-X15 to its original eMMC image?

Kind regard,

Felicity

[Andy Laberge]

With out a copy of your original eMMC image, I believe you're out of luck. If you have it you're good to go.

Because of the limitation size of eMMC (4Gb) on the BBX15, I have learned to develop on the SD card.

I have 3 different SD images at the moment. I have been finding lib's  that coexist on my Desktop (x86) will not

on my BBX15 (Arm). May be because of DSP, PRU support on the BBX15.

Andy

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/177f592c-3431-4e5c-8826-622f7d6bb302%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Charles Steinkuehler]

On 5/17/2019 6:14 AM, Felicity Lv wrote:
> Hello,
>
> I recently flashed a new eMMC image to the BeagleBoard-x15, later found out
> that it's not an image I want. How do I restore the BeagleBoard-X15 to its
> original eMMC image?

You can get the official images here:

http://beagleboard.org/latest-images

Note if you want to flash your eMMC (vs. just run off the uSD card)
you will need to edit uEnv.txt as described in the text.

--
Charles Steinkuehler
cha...@steinkuehler.net

[Robert Nelson]

On Fri, May 17, 2019 at 7:36 AM Felicity Lv <felic...@gmail.com> wrote:
>
> Hello,
>
> I recently flashed a new eMMC image to the BeagleBoard-x15, later found out that it's not an image I want. How do I restore the BeagleBoard-X15 to its original eMMC image?

From my old notes, this might be the default image:

https://rcn-ee.net/rootfs/bb.org/testing/2017-07-02/stretch-lxqt/

Regards,

--
Robert Nelson
https://rcn-ee.com/