I normally use hair spray on glass, but wanted the lower maintenance of kapton tape on my larger printer. When I was using the techshop's replicator duel it just needed a wipe down with acetone occasionally. What have people done to prep kapton tape after applying it the bed? Adding a coating like hair spray defeats the purpose of using the tape. If sanding what grit? Chemical treatment?Chris Fulmer
--
You received this message because you are subscribed to the Google Groups "Bay Area RepRap" group.
To unsubscribe from this group and stop receiving emails from it, send an email to bay-area-repr...@googlegroups.com.
To post to this group, send email to bay-are...@googlegroups.com.
Visit this group at https://groups.google.com/group/bay-area-reprap.
To view this discussion on the web visit https://groups.google.com/d/msgid/bay-area-reprap/CAFSZqxr0Cm0949bUHXW4EBRi%3Dhj0qh__zO1_q09W79wawaCX8w%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
To view this discussion on the web visit https://groups.google.com/d/msgid/bay-area-reprap/CAJNHf64LM6b0Qmy%2BGAyRvDigoojzU_c3d5-L7H6NXaRB6-qhZA%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/bay-area-reprap/CAFSZqxquYi0N8peBfu9LkQPVbfzmN-Of9t8wJtUCAK%2BXpf2EJw%40mail.gmail.com.