Bareos Schedules Bitmask

[Leon Bartle]

Hi All!

https://docs.bareos.org/Configuration/Director.html#technical-notes-on-schedules

claims "For any schedule you have defined, you can see how these bits are set by doing a show schedules command in the Console program." 

When I run "show schedules" in the bconsole, it only returns all Schedule ressources from the configuration. Is there any way to see the bitmask? 

Kind Regards,

Leon Bartle

[Sebastian Sura]

Hi Leon,

the documentation probably needs to be made clearer here as I also understood it to mean that it literally prints out those bits.
What actually happens is that you can infer which bits are set from the `Run = ...` line.  This line may be slightly different from the one that
you specified in your config.

The basic idea is that if for a specific item (so hour, day, month, ...) every bit is saved, then nothing is printed, otherwise it will print you the set ranges,
e.g. if you set everything apart from the 31st day of the month, then it would print 1-30.  Similar things happen for the other fields.

I hope this helps!

Kind Regards
Sebastian Sura

Am 17.10.24 um 14:54 schrieb Leon Bartle:

--
You received this message because you are subscribed to the Google Groups "bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to bareos-users...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/bareos-users/e8190286-4854-4e5d-a854-ca4875e73c96n%40googlegroups.com.

-- 
 Sebastian Sura                  sebasti...@bareos.com
 Bareos GmbH & Co. KG            Phone: +49 221 630693-0
 https://www.bareos.com
 Sitz der Gesellschaft: Köln | Amtsgericht Köln: HRA 29646
 Komplementär: Bareos Verwaltungs-GmbH
 Geschäftsführer: Stephan Dühr, Jörg Steffens, Philipp Storz