Assigning cc controllers

[Synthy]

I can't get the controllers work. When i assign a controller to a knob. I upload to the board. It won't react to the cc controller. Is it because i am running on discovery?

[Johannes Taelman]

Are you getting any other midi response like notes?

How did you connect Midi?

Are cc's send on the right channel?

Use a "midi/in/cc any" object with some disp/.. objects connected to its outlets to diagnose.

CC mapping can be altered during "live" BUT are not updated until engaging live mode again.

On Mon, May 25, 2015 at 10:25 PM, Synthy <p.vh....@gmail.com> wrote:

I can't get the controllers work. When i assign a controller to a knob. I upload to the board. It won't react to the cc controller. Is it because i am running on discovery?

--
You received this message because you are subscribed to the Google Groups "axoloti-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to axoloti-user...@googlegroups.com.
To post to this group, send email to axolot...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/axoloti-users/08363c00-fd44-4c23-b31b-2cce45e3d69c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Synthy]

It response to midi notes. I tried one cc on every midi channel and it did not respond. I will try the "midi/in/cc any" tomorrow to see if there is any response.

Thanks for replying.

[Synthy]

I have tried the "midi/in/cc any" and i saw that the midi controller was on the wrong midi channel. Now its working fine. The envelope controlled filter is doing very fine. I have got very dynamic sounds even with high resonance.