Is native ANT working on nRF52832?

[bill.g...@gmail.com]

Hi Curtis,

I've read through the messages but I'm not clear on this question - is native ANT working via the softdevice on the nRF52832, and if so, what is the procedure for loading the ANT softdevice onto the chip then programming an application through Arduino?

Thanks,

[Curtis Malainey]

Hi Bill,

+Gábor Ziegler 

The library is working towards supporting the softdevice on any platform but my work has become stagnant since COVID-19 lockdown started unfortunately. As for loading the nRF52832 with the respective softdevice it depends on board itself and the respective bootloader. Gabor who I have CCed has written a few articles on how to load the adafruit feather express (nRF52840) with the ANT softdevice. 

Here is one of them http://orrmany.hu/wiki/doku.php?id=arduino:s340_softdevice_adafruit_nrf52840_feather_express

Note this process can vary depending on your build environment and bootloader.

Curtis

--
You received this message because you are subscribed to the Google Groups "ant-api" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ant-api+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ant-api/329ba3d7-f236-467b-913f-22ed594c3a65%40googlegroups.com.

[bill.g...@gmail.com]

Thanks, Curtis,  This is very good information and I'll study it.

On Saturday, March 28, 2020 at 1:23:01 PM UTC-4, Curtis Malainey wrote:

Hi Bill,

+Gábor Ziegler 

The library is working towards supporting the softdevice on any platform but my work has become stagnant since COVID-19 lockdown started unfortunately. As for loading the nRF52832 with the respective softdevice it depends on board itself and the respective bootloader. Gabor who I have CCed has written a few articles on how to load the adafruit feather express (nRF52840) with the ANT softdevice. 

Here is one of them http://orrmany.hu/wiki/doku.php?id=arduino:s340_softdevice_adafruit_nrf52840_feather_express

Note this process can vary depending on your build environment and bootloader.

Curtis

On Fri, Mar 27, 2020 at 9:10 PM <bill....@gmail.com> wrote:

Hi Curtis,

I've read through the messages but I'm not clear on this question - is native ANT working via the softdevice on the nRF52832, and if so, what is the procedure for loading the ANT softdevice onto the chip then programming an application through Arduino?

Thanks,

--
You received this message because you are subscribed to the Google Groups "ant-api" group.

To unsubscribe from this group and stop receiving emails from it, send an email to ant...@googlegroups.com.