Ansible 2.6.3 error : Protocol error, doesn't start with scp! Shared connection to netironmlx closed.

[Carlos Alfaro]

 Hello team I'm in new with ansible can someone help me,Trying to run a raw module command on the Brocade MLX-4 chassis.

Thank you.

************************************************************************************************

*

root@svnet-Inspiron-660:/etc/ansible# ansible netironmlx -m raw -a "show ver" -u svnet -k

SSH password:

netironmlx | SUCCESS | rc=0 >>

Protocol error, doesn't start with scp!

Shared connection to netironmlx closed.

***************************************************************************************************

root@svnet-Inspiron-660:/etc/ansible# ansible --version

ansible 2.6.3

  config file = /etc/ansible/ansible.cfg

  configured module search path = [u'/usr/share/my_modules']

  ansible python module location = /usr/local/lib/python2.7/dist-packages/ansible

  executable location = /usr/local/bin/ansible

  python version = 2.7.15rc1 (default, Nov 12 2018, 14:31:15) [GCC 7.3.0]

**********Command:*************

root@svnet-Inspiron-660:/etc/ansible# ansible netironmlx -m raw -a "show ver" -u svnet -k

SSH password:

netironmlx | SUCCESS | rc=0 >>

Protocol error, doesn't start with scp!

Shared connection to netironmlx closed.

******Yes I can ssh the chassis *******

root@svnet-Inspiron-660:/etc/ansible# ssh svnet@netironmlx

Password:

SSH@netironmlx>ena

No password has been assigned yet...

********** list hosts *****************

root@svnet-Inspiron-660:/etc/ansible# ansible --list-host all

  hosts (9):

    cisco215

    router60

    cer225

    cer224

    cer223

    cer222

    cer221

    cer220

    netironmlx

*******running a raw command to a cisco switch works

root@svnet-Inspiron-660:/etc/ansible#

root@svnet-Inspiron-660:/etc/ansible# ansible cisco215 -m raw -a "show ver" -u svnet -k

SSH password:

cisco215 | SUCCESS | rc=0 >>

Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 15.2(4)E5, RELEASE SOFTWARE (fc2)

Copyright (c) 1986-2017 by Cisco Systems, Inc.

Compiled Mon 18-Sep-17 06:58 by prod_rel_team

ROM: Bootstrap program is C3750E boot loader

BOOTLDR: C3750E Boot Loader (C3750E-HBOOT-M) Version 12.2(35r)SE1, RELEASE SOFTWARE (fc2)

cisco215 uptime is 5 hours, 53 minutes

System returned to ROM by power-on

System image file is "flash:/c3750e-universalk9-mz.152-4.E5.bin"

Last reload reason: power-on

License Level: ipbase

License Type: Permanent

Next reload license Level: ipbase

cisco WS-C3750E-24TD (PowerPC405) processor (revision F0) with 262144K bytes of memory.

Processor board ID FDO1227V045

Last reset from power-on

1 Virtual Ethernet interface

1 FastEthernet interface

56 Gigabit Ethernet interfaces

4 Ten Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address       : 00:22:0D:30:38:00

Motherboard assembly number     : 73-10313-11

Motherboard serial number       : FDO122601VN

Model revision number           : F0

Motherboard revision number     : A0

Model number                    : WS-C3750E-24TD-S

Daughterboard assembly number   : 800-28590-01

Daughterboard serial number     : FDO122502UJ

System serial number            : FDO1227V045

Top Assembly Part Number        : 800-27546-03

Top Assembly Revision Number    : A0

Version ID                      : V02

CLEI Code Number                : COMSE00ARA

Hardware Board Revision Number  : 0x01

Switch Ports Model                     SW Version            SW Image                 

------ ----- -----                     ----------            ----------               

*    1 30    WS-C3750E-24TD            15.2(4)E5             C3750E-UNIVERSALK9-M     

Configuration register is 0xF

Shared connection to cisco215 closed.