On Monday 19 July 2021 at 19:13:21, Tiago Oliveira wrote:
> I actually dont have anything of the module done.
So, how are you getting the error "this operation requires privilege
escalation"?
> I wanted to see the ios_config module and how it was done so i could have
> an ideia of what to do.. but i cant find the documentation and the how to
> do that module.
There may only be source code. Not everyone documents the development of
things like this in sufficient detail that other developers can understand the
design process.
> About the
fs.com switches, the one i am trying to use is a lot similar to
> cisco ios, with small diferences. for example
Sorry, but phrases like "small differences" and "for example" are not enough to
write software. You need specifications - you need definite documentation about
_exactly_ how things need to be done.
> you do enable and then config and not config terminal, and i dont know if that
> changes something for the module not working, because if i use ios_command
> module and write all the commands: enable,config i can use this commands
> inside fs switch config without problems..
Start with something simple.
Make sure you can do one specific, simple command manually, and then get an
ansible module to do it for you. If you need escalated privileges, well, put
that in (I assume you already know how to do that in ansible).
Then, once you have something simple working, build up to the real goal of the
full configuration you are trying to achieve.
If you need further help from the list, though, I really think you need to
provide some details about what you are doing, what the errors are, and what
the
fs.com documentation says needs to be done to make something work.
Antony.
--
You can tell that the day just isn't going right when you find yourself using
the telephone before the toilet.