3D printed bezel

[Chris Davis]

How do you like this?  I finally got a 3D printer with a big enough print area to do this.

[Tom Wilson]

[Andy]

nice Chris!

[Charley Jones]

I still like the bamboo case. But grata print.

Sent from my iPhone 7!

On Jan 31, 2019, at 4:44 PM, Tom Wilson <wils...@gmail.com> wrote:

<Auto Generated Inline Image 1>

--
You received this message because you are subscribed to the Google Groups "Altair-Duino" group.
To unsubscribe from this group and stop receiving emails from it, send an email to altair-duino...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/altair-duino/a970ce2a-b70e-46cf-8195-091b329f45e3%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

<Auto Generated Inline Image 1>

[Brian Decker]

I'd like my next kit to include this - what are you thinking of as an upcharge cost?

On Thursday, January 31, 2019 at 7:18:54 PM UTC-5, Chris Davis wrote:

[Chris Davis]

I'm still trying to figure that out.  They take 19 hours each to print, so I'm looking into having them injection molded.

[Brian Decker]

So this is where I say - as a huge fan - that you tell me it will cost $2-$3 hundred more or *F*off :)

[Brian Welland]

Hi Chris,

Excellent attempt and looks the part - only hope that if you use the injection molding route you will note that Oscar's' PiDP-11 bezel costed an arm and a leg!

--

You received this message because you are subscribed to the Google Groups "Altair-Duino" group.
To unsubscribe from this group and stop receiving emails from it, send an email to altair-duino...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/altair-duino/c1fdbaf3-f6f6-4a98-8567-be73afad1ca8%40googlegroups.com.

[Holger Weiß]

I like it and I guess the color is not final. :-)

I fear that IM tooling will be way to expensive for a low volume production. How many shots are we talking about?

[Chris Davis]

Maybe 1,000.  I'd have them around for a few years!

I'm going to look into have some parts for the IMSAI kit molded so maybe I can work out a deal.

I just grabbed a spool of blue available in my shop, so that's not the final color.

[Chris Davis]

BTW, if anyone has a printer with a 400mm bed, you can print your own.  Here's the file.

[Terry Fox]

Thank you! What printer did you use? I just got a Creality CR-10s Pro last month, so far so good. Had some issues with bed leveling until I followed Luke Hatfield’s instructions.
Terry, N4TLF

[Chris Davis]

I got an Anycubic Chiron.  I had previously bought a Tevo Black Widow, but that was too much fiddling and adjusting.  I just wanted one that worked right out of the box.

[jim3...@gmail.com]

I like it--makes it look a lot different from the front. I'd like to add a larger enclosure for adding some odds and ends and this would make that a lot easier to do while keeping it looking professional.

Maybe I'll have to buy a 3D printer... :-)

Thanks,

Jim W4JBM