Front panel for the Altair 8800

[JPat59]

Is the front panel supposed to sit on top (against) the switches?

[Mike Newhouse]

I think the answer to your question is Yes,

On mine the front panel sits all the way down on the switch's and about four or five treads from the switches are visible.

[Tom Lake]

On the Pro version, my panel does sit right on the switches.

[Antonio Tamairón]

Hi.

In my case, I designed front panel following the original and this one finish just where the switch lever starts. The threaded sits flush with the panel.

--
You received this message because you are subscribed to the Google Groups "Altair-Duino" group.
To unsubscribe from this group and stop receiving emails from it, send an email to altair-duino...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/altair-duino/7dedda0c-46b7-4f22-a2a9-8f3be96dd555n%40googlegroups.com.

[Chris Davis]

A photo would be best to see if your front panel is correct.  Also, you should tell us what version of the kit you have.

[Chris Davis]

Here is a photo of the front panel  correctly seated on the Experimenter version:

On the Pro version it will be similar but less thread showing.

[Antonio Tamairón]

See my custom DIY panel. 

To view this discussion visit https://groups.google.com/d/msgid/altair-duino/a18bd62b-e8db-41d5-87aa-5ca2f9710587n%40googlegroups.com.