Source for Stanchion suppots

[Bill Randall]

Hello to the group,  I am one of the new owners of the Helen K, a 30 Ultra , previously owned by Larry Koenig of Key Largo.  Currently I am replacing a stanchion and am looking for the original source for stanchions and stanchion supports.  Some of them have serious rust problems and one actually lost the nub at the top.  Any help will be greatly appreciated.

Thank you.

Bill Randall

Helen K

30' Ultra

CGSC

Miami, FL

[Joe Valinoti]

Bill:  I believe you can find that info on the INA website

 

Joe Valinoti
S/V iL Gatto NS30U #221
Sea Harbour YC
Oriental, NC USA

~~~~~(\_ ~(\_ ~(\_~~~~~~~~~~

--
You received this message because you are subscribed to the Google Groups "INA Nonsuch Discussion Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email to INA-Nonsuch-Discussi...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/INA-Nonsuch-Discussion-Group/a668d4af-cfbd-4ae9-8f3b-421487b7ca5cn%40googlegroups.com.

[Rob Cohen "Soave" NS33 Westport, CT]

Bill,

Sorry I don't know of a source.

If you do find a source please share.

Good luck,

Rob

s/v SOAVE

NS33 #009

Cedar Point YC

Westport, CT

[Brian]





Bill,

I wonder if there is someone like a plating shop that can restore your stanchions to like new if you can’t find an exact replacement. The rust must be surface rust. I always like to restore the tired old original stuff on my boat. 

Just a thought,

Brian Cayer

Spirit~Wind

N30U 419

Westbrook, CT

On Aug 14, 2025, at 5:52 PM, Rob Cohen "Soave" NS33 Westport, CT <rob....@gmail.com> wrote:

Bill,

--

You received this message because you are subscribed to the Google Groups "INA Nonsuch Discussion Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email to INA-Nonsuch-Discussi...@googlegroups.com.

To view this discussion visit https://groups.google.com/d/msgid/INA-Nonsuch-Discussion-Group/1401112e-1864-4a1d-a1b5-6b81dfddab4cn%40googlegroups.com.

[Brian]



[Bill M]

Bill,

I bought an exact match stanchion from Rig Rite: https://www.rigrite.com. I can't imagine they don't have the bases.

Bill Mortensen

Summer Song 

NS 30 U #335

Noank, CYT

On Thursday, August 14, 2025 at 11:34:19 AM UTC-4 Bill Randall wrote:

[Bill Randall]

Thank you for your help and suggestions.  I replaced the broken stanchion with a used one that is slightly different from the original, but close enough.  I did need to have my machine shop drill a new hole for the angle support plus I needed their help in removing the old stanchion from the base and putting the new stanchion back into it.   It was more work than I anticipated, but that's life working on boats. 

 

Bill Randall 

S/V Helen K

N30U 380

CGSC Miami, FL

To view this discussion visit https://groups.google.com/d/msgid/INA-Nonsuch-Discussion-Group/2CCB9BB6-A96D-4B78-9D9D-DDD62431522F%40att.net.

--

Bill Randall
305-793-3599

[Bill Randall]

Thank you Bill for that information, I will check them out.

Bill Randall

Helen K

NS 30 U # 380

CGSC

Miami, FL

--

--

You received this message because you are subscribed to the Google Groups "INA Nonsuch Discussion Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email to INA-Nonsuch-Discussi...@googlegroups.com.

To view this discussion visit https://groups.google.com/d/msgid/INA-Nonsuch-Discussion-Group/729dd93f-4226-4428-b1c0-dfa8d8a6b02en%40googlegroups.com.

--

Bill Randall
305-793-3599

[Bill Mortensen]

Mine was 25mm. Our hulls are not that far apart. 

On Aug 19, 2025, at 7:22 AM, Bill Randall <bil...@gmail.com> wrote:



You received this message because you are subscribed to a topic in the Google Groups "INA Nonsuch Discussion Group" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/INA-Nonsuch-Discussion-Group/G7-GeOpBomQ/unsubscribe.
To unsubscribe from this group and all its topics, send an email to INA-Nonsuch-Discussi...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/INA-Nonsuch-Discussion-Group/CAE3nrVDbp0ns7Amefn3W8unHEBviwEg_%3DGRjqBG5kefx-cJHKw%40mail.gmail.com.

[Mark Powers La Reina 26C Vancouver, B.C.]

Fogh Boat Supplies list a 1” stanchion base made of cast stainless steel. It looks similar but I can’t say it is identical to yous. The price is
$46 Cdn so probably less than having the original brine basesre chromed.

Mark Powers.