Mingda MD 400D Large HT IDEX 3DP

[Kurt The 3D Printer GUY!!]

This printer popped up in my webpage newsfeed. I thought it looked interesting - thought I would share it here. 

Interesting cause:

1. It's an IDEX
2. It prints HIGHER Temp filaments
3. And - it's a big print volume at 400mm Cubed!

That being said - it's pricey and NOT Really hobby level...

Still - I figured it would be interesting to share this with the group here:

     Mingda MD-400D Large High-Temperature IDEX Hyper-Speed 3D Printer - 3D Printers Depot

-K

[david merten]

I do like the idex design because the other tool is always close, and you can do neat things like mirror printing, or  2 parts at once.

I was very surprised to see they only have 1 high temp hot end  and a regular temp hot end. Now you can't print 2 high temp parts at a time. What a waste. 

          David 

 

--
You received this message because you are subscribed to the Google Groups "3D Printing Tips and Tricks" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 3d-printing-tips--...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/f4147c82-1b5b-4596-a0ef-59e67a3a0905n%40googlegroups.com.