StrataSys Essentially Acquires Essentium...

[Kurt The 3D Printer GUY!!]

...which was my TRUE Dream Job - at Essentium!

I saw this on LinkedIn:

     Happy Nexa3D!

Then, I was passed this other news link:

     Stratasys Absorbs Nexa3D & Essentium!

What a CRAZY World! Yes - Nexa3D - was probably being positioned for a while to sell out - and after Snagging Essentium - That Scumbag Avi is probably getting paid off BIGTIME by StrataSys - and now that CREEP can STOP Working!!!

Ugh...

-K

[John Schneider]

Ha, yep, saw that. They'll revive the filament portfolio which should actually be pretty cool. But no one will be able to afford the filament lol

--
You received this message because you are subscribed to the Google Groups "3D Printing Tips and Tricks" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 3d-printing-tips--...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/269cd01d-dcf4-4e98-8b6f-209f79b633abn%40googlegroups.com.

--

Best Regards,

John Schneider

CEO

 

www.3dfuel.com

Cell: 701-318-0686

Email: jschn...@3dfuel.com

[vr...@optonline.net]

I hear ya - so True indeed!

 

-K

 

------ Original Message ------
From: jschn...@3dfuel.com
To: vr...@optonline.net Cc: 3d-printing-...@googlegroups.com
Sent: Monday, July 7th 2025, 08:30 PM
Subject: Re: StrataSys Essentially Acquires Essentium...
 

Ha, yep, saw that. They'll revive the filament portfolio which should actually be pretty cool. But no one will be able to afford the filament lol

 

On Mon, Jul 7, 2025 at 7:14 PM Kurt The 3D Printer GUY!! <vr...@optonline.net> wrote:
 

-- 

You received this message because you are subscribed to the Google Groups "3D Printing Tips and Tricks" group.

To unsubscribe from this group and stop receiving emails from it, send an email to unsub...@googlegroups.com" target="_blank">3d-printing-tips--tricks+unsub...@googlegroups.com.

To view this discussion visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/269cd01d-dcf4-4e98-8b6f-209f79b633abn%40googlegroups.com.
 

 

 

-- 
 

Best Regards,

 

John Schneider
 

CEO

 

www.3dfuel.com

Cell: 701-318-0686

Email: jschn...@3dfuel.com

 

-- 

You received this message because you are subscribed to the Google Groups "3D Printing Tips and Tricks" group.

To unsubscribe from this group and stop receiving emails from it, send an email to unsub...@googlegroups.com">3d-printing-tips--tricks+unsub...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/CAPnvVKwtKtDtWmWvF6gAhdtZ%3DeEXjB-rOZcj92CRbij5BqEppg%40mail.gmail.com.
 

[Kurt The 3D Printer GUY!!]

Actually - Two things John. 

1 - Yes, Essentium filament is expensive - therefore, target market is Biz/Military world.

2 - What I think would be AMAZING is if StrataSys decided to Invest in Essentium printer technology - to improve and refine what was already started - and then release a new model of the 280 HSE - I think that would be Epic. But, I DOUBT Anything like that will actually happen! Which would be TOO Bad!

-K

[David]

I know, Kurt. Strange turn of events indeed, and hopefully they will keep the Essentium alive. 

To unsubscribe from this group and stop receiving emails from it, send an email to 3d-printing-tips--...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/f4a3a3f4-3a93-4cfe-82aa-c6d509638dd9n%40googlegroups.com.

[Kurt]

Hello there Mr. David-LowBeanCounter,

I only wish that was true. Only thing that will stay alive from Essentium is the Filament line (potentially). 

But, that being said...

An, Inside Scoop...

My former manager, Kris, at Essentium - he started up a new co. - and he is supporting pre-existing customers of Essentium that have the HSE machines. And, he pulled in my buddy Ricky - who was previously the Lead in support of the HSE machines. They ARE in talks with the folks involved in the deal(from iSQUARED AG, a wholly owned subsidiary of Stratasys) - so, who knows the full outcome. Only time will tell. 

My buddy Ricky actually pinged me about 2 weeks ago with questions about my experience with printing ABS on the HSE machines - as all my teammates at Essentium knew about my obsession with ABS - and Acetone welding. But, I wasn't much help to Ricky - since it was just TOO Long ago that I was last working on the HSE machines - and my memory banks have leaked...

-K

To view this discussion visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/CADTa1mrrvPn_WXkdh6TNVCqDVfESycrP7V4F-PuBYp3a-o0b5Q%40mail.gmail.com.