Delta's

[david merten]

Starting a new thread as the monoprice one was kinda getting off topic.

  I have 2 flsun super racers. Got them when they were cheap.  The frame is solid as a rock. Everything has worked great except the hot ends. They seem to break down for one reason or another. All the blocks for the paint holder system I made for my son were printed on one. I do love watching a delta run!

All in all I have 8 printers (not all operational ), with just the 2 being deltas.

             David

[markni...@gmail.com]

I ran a couple of spools of PLA through a SeeMeCNC Eris mini delta, which I got on close out at MicroCenter.

It was a cool, inexpensive little printer, that never sold well.

I never had a single failure with it.

[Bryan Eckert]

I still have my FLSun Q5. I plan to upgrade the board, and I have a Raspberry Pi with screen I'm going to make a controller pad. Great little printer, has really great print quality even if it's a bit slow.

--
You received this message because you are subscribed to the Google Groups "3D Printing Tips and Tricks" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 3d-printing-tips--...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/94a1167c-ba75-4e4f-a6db-0c169c55cd9an%40googlegroups.com.

[Bryan Eckert]

Well most printers at the time were 50-60mm/sec, I could get this to about 110. Which today is pretty slow.

It’s painted, black dry brushed with copper and gunmetal for the teeth. 

I also like this snailien print I did on it

On Mon, Jan 19, 2026 at 4:54 PM Kurt <kurt.the...@gmail.com> wrote:

Wow dude - that skull looks INSANE! It also looks to be multiple colors - especially the silver looking teeth. Also, I thought Delta's were supposed to be REALLY FAST Printers!?!?!?

-K

To view this discussion visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/CANjNy1W4TdWVwHgCa7MMj8uhe4JjO5ksQH9_GOxrVTv%2B_BGKvA%40mail.gmail.com.

[Jeff Ratner]

Deltas are still so much fun to watch.

[Kurt A 3d]

If I were to build a kit, it would either be a baby belt or a Delta — just for the eye candy 

Kurt-A

[Alan B]

Delta Flyer kits are available recently.

To view this discussion visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/28d4bafb-88cf-4b4d-90b2-73873cb882b2n%40googlegroups.com.

[david merten]

A baby belt....lol, that sounds cute.  I have a roll of 6" kapton tape from the old days of bed adhesion. I wonder if a belt could be made with that. Too many ideas, too many projects, I need to clone myself first.

         David

To view this discussion visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/CAHoVSnLE%2BE63vFEfyWJH1oFm1dGBV5ruEJfmpKrzm3KtRNHJgA%40mail.gmail.com.