Re: X2D

[Ray Price]

Yip saw that.  I was planning on a P2S combo purchase later this year, but now will most likely be the X2D.  Evidently the 2nd nozzle print quality is "slightly lower" than the primary nozzle, that should be fine, since the only other alternative is full blown H2D (which I have) or single nozzle changing on a P2S, I guess.

On Tue, Apr 14, 2026 at 10:41 AM 3D Printing Tips and Tricks <3d-printing-...@googlegroups.com> wrote:

You all get the email? I like the mechanical method of hot end switch. Nice.

Also... go to the bottom and there's a notice about a silicon wiper. Finally someone at Bambu figured it out! Too bad Prusa is still clueless.

--
You received this message because you are subscribed to the Google Groups "3D Printing Tips and Tricks" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 3d-printing-tips--...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/4e644a7a-d2b6-4ccd-946c-ceb59a64eb2dn%40googlegroups.com.

[Bryan Eckert]

The second nozzle is a bowden extruder, which I suppose is why they say "lower quality", even though that's not necessarily true.

Kind of underwhelmed, waiting to see what Sovol puts out.

To view this discussion visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/CAGbEhsBNTXAX%2B1W5YJYkDDYUnOsB5VdVbe_jrRkcbAv8f_Yv7w%40mail.gmail.com.