SnapMaker U1 Printing Problems!

[Kurt The 3D Printer GUY!!]

Ugh - bummer to be printing for LESS than a Week - and now I have problems. Sadly - I an Error yesterday - Not really sure what is the problem - but, I essentially shut down the 3DP after it happened. Now trying to start up another print job shortly. This was the error:


This is what it looked like when it had failed and stopped printing (I just put everything back in the similar locations for the Photo Op):


But, here is the other problem - which is REALLY Frustrating!

This is the 1st Dragon I printed - the Dragon of which files were on the printer - and it has you print it at the end of the setup:

The Red was the main body - and it was Spool #1. So, for the Next Dragon - which I already posted - but, will do it again - I swapped the Red filament for a Glow in the Dark Orange Flouro filament - this was that print:


Next - I swapped the Glow filament to Spool location #2 - I put a different filament in Spool location #1 - but, when it was printing (in the FAIL pic above) - instead of it printing the new filament in Spool location #1 on the body - it seems it Automatically just printed Spool #2 for the main body - when it SHOULD have been Spool #1!!!!!

What the HECK!?!?!?

And - FYI - All I did generally was Unload and Load filament into each of those 2 Spool locations - and just did the print again! So - I'm rather surprised that it did it WRONG!!!!

Ugh...

-Kurt

[Bryan Eckert]

Kurt they seem to have a decent wiki page with the error codes:

https://wiki.snapmaker.com/en/snapmaker_u1/troubleshooting/false_power_off_signal_triggered

--
You received this message because you are subscribed to the Google Groups "3D Printing Tips and Tricks" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 3d-printing-tips--...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/4bc86d7d-ba65-46dd-8d25-f021b233716fn%40googlegroups.com.

[Kurt The 3D Printer GUY!!]

YO DUDE - thanks SO MUCH for the Quick reply!!!

I will go check it out. I will also keep folks posted on my progress!

Just a Quick Aside...

1) I'm again DEEP diving into the world of 3D Design and 3D Printing this weekend - more on that in the next posting...

2) I gave a copy of the Glow in Dark Dragon to my neighbor - and nice young dude - who actually came over the other night to ask me to turn down the volume of my music on my PC. I met him Several times before - I felt REAL Bad about that - as his GF was Studying and it was bothering her. So - Today - I dropped by - knocked on his door - gave him the Dragon as an apology - and - DANG - the dude has a 3D Printer - got it about a Month ago or so - and is printing TONS of stuff - but, keeps it at work. I'm eventually going back over to him - to take pics of the COOL Stuff he printed - including a BIG Ray Gun looking thing from a Video game - which he printed AND PAINTED!!! More about him soon - hopefully in another posting soon...

But, yeah - I'm cranking on SEVERAL PRoject this weekend! Gotta PUSH the Limits of 3D Printing!!!!

-K

[Kurt The 3D Printer GUY!!]

Turns out - answer to my one problem was in the UI - I just re-assigned filament spools on the UI here:

-K