SECN-5-RACHEL firmware for GL-MT300n ?

[James]

Hello. 

I'm wondering if there's a RACHEL SECN firmware for the GL-MT300n. If not, is the source code available? I didn't 

see anything for the mt devices on the github. Thanks.

- James 

[T Gillett]

Hi James

I have not done any work on porting the SECN VT-RACHEL firmware to the MT300N.

I have built if for the MT300A which has more RAM and a built in SD card.

You will see the code for MT300A in the vt-firmware repository in the "secn5" branch.

Some experimental binaries are located on the VT Downloads page here:
    http://download.villagetelco.org/firmware/secn/unstable/mt/mt300a/SECN-5/SECN-5-RACHEL/

If you particularly want to pursue the MT300N, then (without thinking too deeply about it) I think it will just be a case of recompiling the MT300A code with the target changed to MT300N.

The Rachel content can be stored on either the USB or SD memory so it should be OK use USB memory on the MT300N.

I am currently working on building SECN5 on stable LEDE, so if you are not in too much of a rush, I will probably get to the MT300x devices in a couple of weeks time.

May I ask what your area of application is for the RACHEL library please?

Regards

Terry

--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-dev+unsubscribe@googlegroups.com.
To post to this group, send email to village-telco-dev@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/372e1825-f527-4624-aeaa-fd10e2254a81%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.