VA 8.5 > SGML/XML resources not found

[Marten Feldtmann]

After building my server only with ICs, these servers (on Linux and Windows) prints the following messages at startup:

abtxmap.dtd-> SGML Error #ResourceNotAvailable: 'Resource could not be accessed.
  PublicId=''abtxmap.dtd''  SystemId=''abtxmap.dtd'''
abtschem.map-> SGML Error #ResourceNotAvailable: 'Resource could not be accessed
.  PublicId=''abtschem.map''  SystemId=''abtschem.map'''
AbtXmlMappingParserApp failed to initialize XML mapping resource 'abtschem.map'
abtvast.map-> SGML Error #ResourceNotAvailable: 'Resource could not be accessed.
  PublicId=''abtvast.map''  SystemId=''abtvast.map'''
AbtXmlMappingParserApp failed to initialize XML mapping resource 'abtvast.map'

I changed the value in the [Xml] section of the corresponding "ini" file to show to the XML directory of the server download.

Any idea, what is wrong here ?????

[Marten Feldtmann]

The first step is done. I've changed my Xml-IC and put some output messages into AbtXmlConfiguration>>startUp and I get the following initialize outputs:

All my Xml files are located at: D:\projects\va850-server\server\xml\
All my Xml files are located at:

That means, that AbtXmlConfiguration startUp is called twice during the startup procedure of my IC'd server system. The first one is correct, but the second call - whereever it comes from - is not correct.

[Marten Feldtmann]

And here is the startup sequence:

**AbtXmlBaseApp>>loaded is executed
AbtXmlBaseApp>>startUp is executed
AbtXmlConfiguration>>startUp is executed
All my Xml files are located at: D:\projects\va850-server\server\xml\ read from <>

**AbtXmlBaseApp>>startUp is executed
AbtXmlConfiguration>>startUp is executed
All my Xml files are located at:  read from <>


Another interesting stuff is, that the ini file location can not be retrieved (in both calling sequences above). It produced an output:

Memory allocation error: VMprEsIniFileFullPathAndName->iniFileNameAll

[Marten Feldtmann]

Ok and here the explanation.

I started the application with the following command line:

..\server\bin\esvio -imskXDDemo.ic

and the "loaded"-sequence (in my prior posting) is executed with the content of mskXDDemo.ini.

Then I added a file "esvio.ini" (with slightly different XML path content) and the "startup"-sequence  (in my prior posting) is executed with the content of esvio.ini (!!!!).

Without the file esvio.ini the primitive fails (mentioned in an earlier posting) !. With the file esvio.ini I get the following startup output (which is more or less strange, because esvio.ini does NOT contain the correct XML path):

**AbtXmlBaseApp>>loaded is executed
AbtXmlBaseApp>>startUp is executed
AbtXmlConfiguration>>startUp is executed
All my Xml files are located at: D:\projects\va850-server\server\xml\ read from

<esvio.ini>

**AbtXmlBaseApp>>startUp is executed
AbtXmlConfiguration>>startUp is executed

All my Xml files are located at: D:\projects\va850-server\server\xml2\ read from
 <esvio.ini>

Now one could say: throw away <mskXDDemo.ini> and use only <esvio.ini>, but this is not possible, because it expects <mskXDDemo.ini> for NLS stuff and other path information (e.g. IC_ROOT).

I ended up with the following solution:

* mskXDDemo.ini with FULL content
* esvio.ini with only [Xml]  stanza information

Hello Instantiations ! Any idea ?

[Marten Feldtmann]

Same problems exists, when trying to read values from the configuration frameworks - therefore be aware to put your config values in esvio.ini and not into your ic specific ini file.