I apologize if I missed something obvious, but my 1st install of seafile server is failing at very early stage:
---
Checking packages needed by seafile ...
Checking python on this machine ...
Find python: python2.6
Checking python module: setuptools ... Done.
Checking python module: python-simplejson ... Done.
Checking python module: python-imaging ... Done.
Checking python module: python-sqlite3 ... Done.
Checking for sqlite3 ...Done.
Checking Done.
What do you want to use as the name of this seafile server?
Your seafile users would see this name in their seafile client.
You can use a-z, A-Z, 0-9, _ and -, and the length should be 3 ~ 15
[server name]: seafile-test
What is the ip or domain of this server?
For example,
www.mycompany.com, or, 192.168.1.101
[ip or domain]: 192.168.1.10
What tcp port do you want to use for ccnet server?
10001 is the recommended port.
[default: 10001 ]
Where do you want to put your seafile data?
Note: Please use a volume with enough free space.
[default: /home/fd/seafile-test/seafile-data ] /mnt/usb-disk/seafile-data
What tcp port do you want to use for seafile server?
12001 is the recommended port.
[default: 12001 ]
This is your config information:
server name: seafile-test
server ip/domain: 192.168.1.10
server port: 10001
seafile data dir: /mnt/usb-disk/seafile-data
seafile port: 12001
If you are OK with these configuration, press [ENTER] to continue.
Generating ccnet configuration in /home/fd/seafile-test/ccnet...
Error occured during setup.
Please fix possible problems and run the script again.
---
How can I find out what the error is?
Thanks,